4 Using your HD recorder
4.1Standby/wake up
To put your HD recorder into standby, press
on your HD recorder’s front panel or remote control.To take your HD recorder out of standby, press
again.You can also press BACK 
, P+/P- or any number button on your remote control to wake up your HD recorder. See page 7 for more information.
4.2Changing channels
To change channels, use the P+/P- on your remote control or your HD recorder’s front panel.You can also use the number buttons on your remote control.
Press BACK 
to switch to the last channel you were watching.
You can also use the
Note
Initially, HD programmes are available on channels 50 and 51. Switch to these channels to watch HD programmes.
4.3Adjusting volume
To increase or decrease the volume, press
To mute or restore the sound, press 
.When you mute your sound, the 
icon is shown in the top right corner of your TV.This icon disappears after a few seconds.
4.4Using the channel banner
Channel information
When you change a channel, the channel banner appears briefly to show information about the current programme. By default, it appears for
5 seconds.To set the length of time that the channel banner remains
Changing channel
To change the channel, display the channel banner by pressing INFO.
When the channel banner is 
/ 
to see what programmes are currently showing on other channels. If you see a programme you want to watch, press OK.
To display more information about the current programme on the channel listed in the channel banner, press INFO 
again.
To display what programme is on next (on the channel listed in the channel banner), press the yellow button.
Press INFO 
a third time, or press EXIT to remove the channel banner without changing the channel.Alternatively, press BACK 
to return to the channel banner.
14 | Using your HD recorder |
