By default, the instant recording feature is designed to record only the next two hours of the selected programme.The end time is shown after the programme name in the Record Management
To increase this time by 10 seconds, press record l when the Record Management menu is
To record a complete programme or series, use the TV guide. See the next section.
If you try to record a programme when two other programmes are already being recorded, the Conflict - check guide message is displayed in the Record Management
To stop recording, press stop L. In the Record Management menu that pops up, use 
/ 
to highlight the programme you no longer want to record and press stop L again.
4.9.2Scheduling recordings
Press GUIDE 
to display the TV guide. Use 
/ 
/ 
/ 
to highlight the programme you want to record, and press the red button. In the menu that pops up, use 
/ 
to highlight Record the selected programme or Record the selected series and press OK to confirm.
If the programme is on now, your HD recorder starts recording instantly. If it is on at a later time, your HD recorder will record the programme when it starts.The
Using your HD recorder
programme is highlighted in red in the TV guide.
You can also use the Scheduled recordings menu to view all the programmes you have selected for recording (see page 21).
When you select a programme to record, your HD recorder checks whether it is on at the same time as any other programmes you have previously selected for recording. If more than two selected programmes are on at the same time, this creates a conflict. Your HD recorder lets you know about the conflict and shows which previously scheduled recordings you can cancel in order to record your new selection.
If a conflict was caused due to a change in the time of the broadcast programme, then you use the Scheduled recordings menu to view and resolve such conflicts
(see page 21).
To cancel the scheduled recording of a programme, use 
/ 
/ 
/ 
to highlight the programme in the TV guide, and press OK.
19
E N G L I S H
