Radio mode
Radio mode
Adjusting the tuner
To ensure proper functioning of the tuner, the device must be set for the region in which it is being operated. You can select among Europe (EUROPE), America (USA), South America
The radio functions described in these op- erating instructions refer to the tuner set- ting EUROPE.
Switch off the device by pressing but- ton 2.
Hold the buttons 1 and 5 <pressed at
the same time and switch on the device again with the button 2.
"TUNER" is displayed.
Select your tuner region with the 
or 
button 6.
To save the setting,
switch the device off and on again or wait approx. 8 seconds. The radio starts playing with the last setting se- lected (radio, CD, CD changer or AUX).
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BND/TS ?button
or
press the SRC/
button >repeated- ly until the memory bank, e.g. "FM1", appears on the display.
A border appears around the radio symbol.
Convenient RDS functions
This device is equipped with an RDS radio receiver (Radio Data System). Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the sta- tion name and programme type (PTY).
The station name appears on the display as soon as the tuner receives it.
The convenient RDS functions AF (Alternative Frequency) and REGIONAL ex- tend your radio’s range of functions.
•AF: If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set.
•REGIONAL: At certain times, some ra- dio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are transmitting different pro- gramme content.
Note:
REGIONAL must be activated/deacti- vated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions (AF and REGIONAL),
press and hold down the TRAF =but- ton for longer than two seconds.
The RDS function is active if the RDS sym- bol appears on the display.
38
