Radio mode
"SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity set- ting.
Set the desired sensitivity level using
the 
buttons 6.
When you have finished making your chang- es,
press the MENU button :.
Note:
You can set different sensitivity levels for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press the station button 1 - 5 <of the desired station.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briefly. You can set the scanning time from 5 to 30 seconds in the menu (in increments of 5 seconds).
Starting SCAN
Press and hold down the MENU button :for longer than two seconds.
Scanning begins. "SCAN" appears briefly on the display followed by a flashing display of the current station name or frequency.
Storing stations automatically (Travelstore)
You can automatically store the five sta- tions offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank.
Note:
Any stations that were previously stored in this memory bank are deleted in the process.
Press and hold down the BND/TS ? for longer than two seconds.
Cancelling SCAN and continuing listening to a station
Press the MENU button :.
Scanning stops and the radio continues playing the station that it tuned into last.
Setting the scanning time
Press the MENU button :.
Press the 
or 
button 6 repeat- edly until "SCAN TIME" appears on the display.
Set the desired scanning time using the 
buttons 6.
40
