Radio mode
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu- ally if the RDS function is deactivated.
Press the or button 6.
Browsing through broadcasting networks (FM only)
If radio stations provide several pro- grammes, you have the option of browsing through these so-called "broadcasting net- works".
Note:
The RDS function must be activated be- fore you can use this feature.
Press the or button 6 to switch to the next station on the broadcasting network.
Note:
When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.
Press the MENU button :.
Press the or button 6repeatedly until "SENS" and the currently set value appears on the display.
39
Switching REGIONAL on/off
Press the MENU button :.
Press the 
or 
button 6repeated- ly until "REG" appears on the display. "OFF" or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
press the 
or 
button 6.
Press the MENU button :.
Selecting the waveband/memory bank
This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.
Five stations can be stored in each memory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
briefly press the BND/TS ?button.
Tuning into a station
There are various ways of tuning into a sta- tion.
Automatic station seek tuning
Press the 
or 
button 6.
The radio tunes into the next receivable sta- tion.
ENGLISH
