
C H A P T E R 12
Configuring EtherChannels
This chapter describes how to configure EtherChannels on the Cisco 7600 series router Layer 2 or Layer 3 LAN ports.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
•Understanding How EtherChannels Work, page
•EtherChannel Feature Configuration Guidelines and Restrictions, page
•Configuring EtherChannels, page
Tip For additional information (including configuration examples and troubleshooting information), see the documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding How EtherChannels Work
These sections describe how EtherChannels work:
•EtherChannel Feature Overview, page
•Understanding How EtherChannels Are Configured, page
•Understanding Port Channel Interfaces, page
•Understanding Load Balancing, page
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
|
|
| |
|
|