C H A P T E R 2
Basic MSFC Software Configuration
This chapter provides the basic Multilayer Switch Feature Card 2 (MSFC2) configuration information for the Cisco 7600 Optical Services Router (OSR). For more detailed configuration information, refer to the software configuration and command reference publications for the Cisco 7600 OSR.
For information about basic supervisor engine software configuration, see
Chapter 1, “Basic Supervisor Engine Software Configuration.”
This chapter contains these sections:
•Configuring the MSFC2, page
•Using the Global Configuration Mode, page
•Verifying the Running Configuration Settings, page
•Saving the Running Configuration Settings to NVRAM, page
•Reviewing the Running Configuration Settings, page
•Performing Other Configuration Tasks, page
Configuring the MSFC2
The information in this section applies only if the system does not boot automatically on startup from a specified default Cisco IOS software image.
The MSFC2 in the Cisco 7600 OSR is administered by a command language interpreter called the EXEC. You must boot the MSFC2 and log in to the system before you can issue commands to the EXEC.
|
| Cisco 7600 Optical Services Router Quick Software Configuration Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|