Cisco Systems 7600 manual An OC-12 ATM interface installed in slot

Page 18

Chapter 2 Basic MSFC Software Configuration

Verifying the Running Configuration Settings

version 12.1. no service pad

no service udp-small-servers no service tcp-small-servers

hostname Router

-----------!

enable password lab

no ip domain-lookup

ip host ray 172.27.136.253 ip host crusty 171.69.209.28

interface POS6/0

ip address 12.1.1.1 255.255.255.0 crc 32

Example of Running Configuration Settings for OC-12 ATM Interface


		The show running-configcommand typically displays the following output for
		an OC-12 ATM interface installed in slot 6:
		Router# show running-config
		Building configuration...
		Current configuration:
	!
		version 12.1
		no service pad
		no service udp-small-servers
		no service tcp-small-servers
	!
		hostname Router
	-------------!
		enable password lab
	!
		no ip domain-lookup
		ip host ray 172.27.136.253
		ip host crusty 171.69.209.28
	!
	!
		Cisco 7600 Optical Services Router Quick Software Configuration Guide

2-18	78-12799-01

Image 18

Contents Configuring the MSFC2 This chapter contains these sectionsConsole session Using the setup Facility or the setup Command That you have successfully booted the system Configuring Global ParametersBoot the system to display the user Exec prompt Router StepsBasic Msfc Software Configuration Configuring the MSFC2 This display shows that no interfaces have been configured Enter the enable secret password when prompted to do soFor future use, make a note of this password Enter the enable password when prompted to do so Sample Display of Global Parameters Specify the Igrp autonomous system number as followsConfiguring Network Interfaces Configuring the Gigabit Ethernet Interfaces Configuring the POS InterfacesConfiguring the ATM Interfaces Verifying and Saving the Layer 3 Interface ConfigurationRouter Router# show version Using the Global Configuration Mode Verifying the Running Configuration Settings Router# show running-configHostname Router No service pad An OC-12 ATM interface installed in slot Reviewing the Running Configuration Settings Saving the Running Configuration Settings to NvramDisplays the following output Aal5mux ip 155000 155000 Performing Other Configuration Tasks Configuring the Software Configuration Register Configuring Boot Field Settings and Using the Boot Command Changing the Software Configuration Register Settings Routerconfig# config-register 0xvalueRouterconfig# end Router# Privileged Exec mode Recovering a Lost PasswordThis section tells you how to recover a lost password To recover a lost password, perform these stepsPress Return Reboot the router and enable it using the recovered password

Related manuals

Manual 12 pages 20.11 Kb

Manual 70 pages 32.94 Kb

Manual 20 pages 62.17 Kb

Manual 10 pages 7.94 Kb

an OC-12 ATM interface installed in slot 6:

Router# show running-config

no service pad

hostname Router