Cisco Systems 800 Series quick start Overview, Parts List, Verify the PC Setup

Page 3

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

2Overview

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 800 series router. For advanced cabling information, refer to the Cisco 800 Series Router Hardware Installation Guide. For advanced configuration information, refer to the Cisco 800 Series Router Software Configuration Guide. These documents are available on Cisco.com.

3Parts List

The shipment of your Cisco 800 series router includes the following items:

One Cisco 800 series router

One yellow Ethernet cable

One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)

One red ISDN U cable (Cisco 802 and Cisco 804 only)

One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)

One blue console cable

One DB-9-to-RJ-45 adapter (for use with the blue console cable)

One DB-25-to-RJ-45 adapter (for use with the blue console cable)

One black power supply

One black power supply cord

Product Documentation

4Verify the PC Setup

Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which is available on Cisco.com.

3

Image 3
Contents Cisco 800 Series Router Cabling and Setup Replacement, Repair, or Refund Policy for Hardware Cisco One-Year Limited Hardware Warranty TermsParts List Verify the PC SetupOverview Connect the Cisco 800 Series Router to a PC Connecting a Cisco 800 Series Router to a PCConnect the Cisco 800 Series Router to a Hub Connecting a Cisco 800 Series Router to a HubConnect an Isdn Line Option A-Connecting Cisco 801 and Cisco 803 RoutersConnecting an 802 or 804 Router to an Isdn Line Option B-Connecting Cisco 802 and Cisco 804 RoutersConnect Telephone, Fax Machine, or Modem Connecting an 800 Series Router to a TelephoneVerifying the LEDs Connect the Power and Turn On the RouterDocumentation DVD Obtaining DocumentationDocumentation Feedback Cisco.comCisco Technical Support Website Reporting Security Problems in Cisco ProductsCisco Product Security Overview Obtaining Technical AssistanceSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Page Page Page USA