Required Tools and Equipment | Cisco Systems AS5350XM specs

Chapter 2 Preparing to Install the Cisco AS5350XM Universal Gateway

Required Tools and Equipment

The following items are included with the universal gateway:

•19- (48.26-) and 24-inch (60.96-cm) rack-mount kits

•Rubber feet for desktop installation

•RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)

•RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)

•RJ-45-to-DB-25 male DCE adapter (labeled MODEM)

•RJ-45-to-RJ-45 rollover console cable

•ESD-preventive wrist strap

•Nylon cable tie

•Cable tie holder

•Grounding lug

You might need the following equipment, which is not included:

•Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection

Caution To comply with the intra-building lightning surge requirements of GR-1089-CORE, Issue III, October 2002, you must use a shielded cable when connecting to either of the Cisco AS5350XM universal gateway Ethernet ports. The cable must consist of shielded cable terminated by shielded connectors on both ends, with the cable shield material tied to both connectors.

•Straight-through RJ-45-to-RJ-45 cables for T1 connections (one for each connection)

•E1 cables for E1 connections (one for each connection)

•Ethernet hub or PC with a network interface card for Ethernet LAN connections

•PC running terminal emulation software for local administrative access

•Modem for remote administrative access

Preparing to Connect to a Network

When you set up your universal gateway, consider distance limitations and potential electromagnetic interference (EMI) as defined by the Electronic Industries Association (EIA).

Warning Hazardous network voltages are present in WAN ports regardless of whether power to the router is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the router first. Statement 77

Cisco AS5350XM Universal Gateway Chassis Installation Guide

	OL-6417-02	2-3