Cisco Systems 78-17023-01 manual System Requirements for Cisco Network Planning Solution

C H A P T E R 2

System Requirements for

Cisco Network Planning Solution

This chapter describes the system requirements for the individual components in Cisco NPS. Cisco recommends that, before you start to install Cisco NPS, you verify that your computer hardware and software meet the requirements outlined in this chapter.

After you complete this step, return to the “Installation Workflow” section on page 1-1.

Design and Analysis: System Requirements

Supported Platforms

Table 2-1	Supported Platforms for Design and Analysis
Vendor1		OS	Processor
Sun Microsystems		Solaris 8, 9	UltraSPARC or later processor (such as
			UltraSPARC II or UltraSPARC III)
Microsoft		Windows NT 4.0	Intel Pentium 3, 4, or compatible (1.5 GHz or
		Windows 2000 Professional	higher)
		Windows XP Professional
		Windows 2000 Server
		Windows Server 2003

1. Design and Analysis is supported on the English language version of each operating system.

Installation Guide for Cisco Network Planning Solution

78-17023-01 2-1