Cisco Systems 78-17023-01 manual Required System Patches, System Configuration

Chapter 2 System Requirements for Cisco Network Planning Solution

Design and Analysis: System Requirements

Required System Patches

Table 2-2	Required System Patches for Design and Analysis
Vendor		OS	Patch Number/Name
Sun Microsystems		Solaris 8	Solaris 8 Recommended Patch
			Cluster1
			Solaris 8 Patch 111308-042
Microsoft		Windows NT 4.0	Service Pack 3, 5, or 6a (Service
			Packs 4 and 6 are not supported)
		Windows 2000 Professional	Service Packs 1, 2, and 4 are
			supported, but not required.
		Windows XP Professional	Service Pack 1 is required;
			Service Pack 2 is supported, but
			not required.

1.To obtain the Solaris 8 Patch Cluster, follow the instructions in Obtaining the Solaris 8 Patch Cluster.

2.Patch 111308-04 is required only if using the Parallel Discrete-Event Simulation Kernel.

Obtaining the Solaris 8 Patch Cluster

To obtain the Solaris 8 patch cluster, perform the following procedure:

Step 1 Visit http://sunsolve.sun.com/patches.

Step 2 Follow the link Recommended Patch Clusters from the right-hand side of the page.

Step 3 Download the Solaris 8 patch from the listing of Recommended Solaris Patch Clusters, J2SE and Java Enterprise System Clusters.

System Configuration

Table 2-3 System Configuration for Design and Analysis

RAM	Minimum 256 MB, recommended 512 MB – 2 GB1
System File Space	760MB (Windows), 1.1GB (Solaris)
Working File Space	100 MB or more for temporary and log files
Display	Resolution: 1024x768 minimum

1.Recommended system configuration varies based on scale and complexity of analysis being performed. Please contact your Cisco representative to determine recommendations for your specific Design and Analysis deployment.

Installation Guide for Cisco Network Planning Solution

2-2 78-17023-01