Cisco Systems OL-3597-01 manual Chassis Commissioning and Subchassis Discovery

Chapter 3 Deploying and Discovering Objects

Commissioning

Commissioning

The Commissioning section covers the following areas:

•Chassis Commissioning and Subchassis Discovery

•Module Commissioning and Discovery

Chassis Commissioning and Subchassis Discovery

After you deploy a chassis, the next step in creating a manageable system is to commission the chassis (which begins the process of subchassis discovery). The following figure shows a Cisco 3662–AC chassis map before subchassis discovery. Subchassis discovery identifies all physical objects (that is, modules and interfaces) within the chassis and places them into the chassis map.

Figure 3-20 Before Subchassis Discovery

Line cards and interfaces located within the chassis are discovered at this time. Commissioning not only discovers the chassis and all the physical objects within the chassis, but also initiates heartbeat polling, which allows alarms to be raised on the chassis and all physical objects within the chassis.

Because the chassis is the highest–level object, all objects under the chassis are commissioned as well when you commission the chassis. One level down, if you commission a module interface, you commission all physical objects underneath that level. If you commission a port adapter, you

Cisco Access Router Manager User Guide

3-22 OL-3597-01