Chapter 3 Deploying and Discovering Objects
Deployment
Deployment
Manual deployment consists of three stages as shown in the following figure.
Figure 3-4 Deployment Process Workflow
Stage 1: Manually Deploy
Generic Container Objects
(e.g., Sites)
Stage 2: Chassis Level
Deployment
Stage 3: Subchassis
Level Discovery
Chassis Auto Discovery
Chassis Manual
Deployment
(Quick Start)
Chassis Manual
Deployment
80590
1.The first deployment stage is to manually deploy a generic object (e.g., Site). A generic object can be looked upon as a container object where you can deploy further objects that represent the chassis, line cards and interfaces contained within the chassis. For further information, see the “Deploying Generic Objects” section on page
2.The second deployment stage is at the chassis level. The chassis can be auto discovered or manually deployed. For further information, see the “Automatically Discovering Chassis” section on page
3.The third deployment stage is subchassis level discovery. Subchassis discovery involves either chassis commissioning or auto discovery of objects within a managed chassis. For further information, see the “Chassis Commissioning and Subchassis Discovery” section on page
Cisco Access Router Manager User Guide
|
| ||
|
|