Cisco Systems CISCO7206 quick start Preparing for Workbench or Tabletop Installation

Page 6

Port adapter documentation for configuring the interfaces

T1 channel service unit/data service unit (CSU/DSU) that converts the High-Level Data Link Control (HDLC) synchronous serial data stream into a T1 data stream with the correct framing and ones density to connect a serial port to a T1 network. (Some telephone systems require a minimum number of 1 bits per time unit in a data stream, called ones density.) Several T1 CSU/DSU devices are available as additional equipment, and most provide a V.35, EIA/TIA-449, or EIA-530 electrical interface.

Preparing for Workbench or Tabletop Installation

For a workbench or tabletop installation, verify the following before installing the router:

1.The router is off the floor and has adequate ventilation.

2.An adequate chassis ground (earth) connection exists for the router.

3.The router has at last 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (sides of router).

4.The router has 19 inches (48.3 cm) clearance at the front and rear to allow for field replaceable unit (FRU) replacement or installation, or to access cables or equipment.

5.Port adapter and power supply filler panels are installed if port adapters and a second power supply are not installed. There must be no empty slots.

For cable-management bracket installation instructions, see page 7.

Preparing for Rack-Mount Installation

Make these decisions before you begin the rack-mounting tasks:

Decide whether or not you want to front- or rear-mount the chassis.

Decide whether or not you want to attach cable-management brackets.

Determine the type of rack—four-post or two-post—that you will be using.

Note To install the Cisco 7206 as a router shelf in a Cisco AS5800 Universal Access Server, refer to the Cisco AS5800 Universal Access Server publications online at http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/index.htm.

6

Image 6
Contents Cisco 7206 Router Quick Start Guide Documentation Survey Documentation and ResourcesDocument Revision History Related DocumentationWorld Wide Web Port Adapter DocumentationOther Useful Links Obtaining Documentation Documentation CD-ROMOrdering Documentation Documentation FeedbackPrepare for Installation Site Preparation and UnpackingTools and Parts Preparing for Workbench or Tabletop Installation Preparing for Rack-Mount InstallationRack-Mount the Router Brackets Front-Mounted-Chassis Protrudes from the RackBrackets Front-Mounted-Chassis Recessed in Rack Cisco 7200 SeriesBrackets Rear-Mounted-Front Protrudes from the Rack Two-Post or Four-Post Rack Installation Brackets Rear-Mounted-Front Recessed in the RackChassis Ground Connection Installation Connect the Router to the Network Controller Console and Auxiliary Port Cable ConnectionsMII Connections Ethernet Port ConnectionsPort Adapter Cable Connections RJ-45 ConnectionsConnecting AC-Input Power Start and Configure the RouterPower Cable Connections Connecting DC-Input Power57013 Starting and Configuring the Router Performing a Basic Configuration Using the Setup Facility Configuring Global ParametersFor the following query, do not enable Clns Page Configuring Interfaces Configuring Ethernet InterfacesNo mop enabled Interface serial1/0 Saving the Running Configuration to Nvram Checking the Running Configuration SettingsViewing Your System Configuration Performing Complex Configurations Replacing or Recovering a Lost PasswordAfter Installation Replace the Network Processing EngineReplace the I/O Controller SeriesReplace the Flash Memory Card or Flash Disk Replace a Port Adapter or Service Adapter Replace the Power Supply Technical Assistance Center Technical AssistanceCisco.com Cisco TAC Web SiteCisco TAC Escalation Center Page USA

CISCO7206 specifications

The Cisco 7206 is a versatile and powerful router designed to meet the demands of enterprise networking environments. A member of Cisco's 7200 series, this router is ideal for a range of applications including enterprise edge routing, service provider aggregation, and large branch office connectivity. As network infrastructures continue to grow in complexity, the Cisco 7206 stands out with its robust features, advanced technologies, and reliable performance.

One of the key characteristics of the Cisco 7206 is its modular architecture. This allows for various interface cards to be installed, enabling customization to meet specific networking requirements. The router supports multiple WAN technologies, including T1, E1, and various DSL connections, facilitating versatility and accommodating different connectivity needs. The modularity also extends to its processors and memory, allowing businesses to scale their networking capabilities as they grow.

The Cisco 7206 employs Cisco's proprietary IOS software, providing a wealth of networking features including advanced routing protocols, such as BGP, OSPF, and EIGRP. This ensures robust and reliable data transmission across diverse environments. Quality of Service (QoS) features are also integrated into the router, allowing for traffic prioritization and management of bandwidth, which is especially critical for applications requiring low latency, such as VoIP or video conferencing.

Additionally, security features integrated into the Cisco 7206, including IPsec for VPNs, access control lists (ACLs), and advanced encryption methods, assure that data is transmitted securely across the network. The router also supports Network Address Translation (NAT) and firewall capabilities, offering an extra layer of protection against unauthorized access.

In terms of performance, the Cisco 7206 is equipped with high-speed interfaces and a powerful CPU, enabling it to handle substantial amounts of data traffic efficiently. With support for both IPv4 and IPv6, it indeed meets the needs of modern networks while future-proofing enterprise infrastructures as they transition to newer protocols.

Overall, the Cisco 7206 router combines flexibility, high performance, and advanced features, making it a powerful solution for organizations needing reliable and adaptable networking solutions. With its modular design and extensive compatibility, it provides an effective way for businesses to manage their communications and data traffic.