Cisco Systems OL-14361-01 manual Command or Action Purpose, Example, 104, Configure

Chapter 5 Configuring Additional Router Features

Configuring the Domain Name and Domain Name Server

To configure the DNS and DNS server, complete the following steps:

SUMMARY STEPS

1.configure

2.domain name domain-name-of-organization

3.domain name-server ipv4-address

4.commit or end

5.show hosts

DETAILED STEPS

	Command or Action	Purpose
Step 1
	configure	Enters global configuration mode.
	Example:
	RP/0/RP0/CPU0:router# configure
Step 2
	domain name domain-name-of-organization	Defines a default domain name used to complete
		unqualified hostnames.
	Example:
	RP/0/RP0/CPU0:router(config)# domain name
	cisco.com
Step 3
	domain name-server ipv4-address	Specifies the address of a name server to use for name and
		address resolution (hosts that supply name information).
	Example:	Note You can enter up to six addresses, but only one for
	RP/0/RP0/CPU0:router(config)# domain	each command.
	name-server 192.168.1.111

	Cisco IOS XR Getting Started Guide
5-104	OL-14361-01