Cisco Systems RV215WAK9NA quick start Back Panel, Side Panel

Wireless The light is off when the wireless radio is disabled (switched off). It flashes green when the wireless radio is transmitting or receiving data.

The button, when held for 5 seconds or more, switches the wireless radio on or off. The button and the LED is lit green when the wireless radio is enabled (switched on).

LAN (1-4)The numbered lights correspond to the LAN ports on the back panel.

Lit green when the corresponding port is connected to a device. Flashes green when the port is sending or receiving data.

Back Panel

RESET—The RESET button has two functions:

•To reboot the unit and retain the current configuration, press and hold RESET for at least 3, but no more than 10 seconds, by using a paper clip or a pen tip.

•To reboot the unit and restore the factory default configuration, press and hold in the RESET button for more than 10 seconds. Changes you have made to the Cisco RV215W configuration are lost.

LAN (1-4)—RJ-45 device connections to link local area network devices, such as PCs, print servers, or switches, to the firewall.

WAN (Internet)—Internet device connection for connecting the firewall to a wide area network device, such as a cable or DSL modem.

POWER—Switch that toggles power to the device on or off.

12VDC—Power port that connects the firewall to the provided 12VDC power adapter.

Side Panel

USB—Type A USB port on the right side of the housing that supports 3G/4G/LTE USB dongles.

Cisco RV215W Wireless-N VPN Firewall 3