Cisco Systems RV215WAK9NA quick start Welcome, Installing the Cisco RV215W, Cisco RV215W Features

Welcome

Thank you for choosing the Cisco Small Business RV215W Wireless-N VPN Firewall.

This guide describes how to physically install your Cisco RV215W and launch the web-based Device Manager.

1 Installing the Cisco RV215W

Placement Tips

To prevent the firewall from overheating or being damaged:

•Ambient Temperature—Do not operate it in an area that exceeds an ambient temperature of 104°F (40°C).

•Air Flow—Be sure that there is adequate air flow around the firewall.

•Mechanical Loading—Be sure that the firewall is level and stable to avoid any hazardous conditions.

Place the device on a flat surface so that it sits on its four rubber feet.

2 Cisco RV215W Features

Front Panel

Power	Solid green to indicate the unit is powered on and
	booted. Flashes green when the device is
	booting or loading the firmware.
USB	Lit green when the corresponding port is
	connected to a device. Flashes green when the
	port is sending or receiving data.
WAN	Solid green when the firewall is connected to the
	Internet by using a wired connection. The light is
	off when it is not connected to the Internet or it is
	connected by using a USB dongle. The light
	flashes when it is sending or receiving data over
	the wired connection.

2 Cisco RV215W Wireless-N VPN Firewall