ii
BiGuard S5 REMOTE PORTAL GUIDE
Safety Information
The BiGuard S5 is built for reliability and long service life. For your safety, be sure to read and follow these guidelines and safety warnings:
•Read this installation guide thoroughly before attempting to set up the BiGuard S5.
•The BiGuard S5 is a complex electronic device. DO NOT open or attempt to repair it yourself. Opening or removing the covers can expose you to high voltage and other risks. In the case of malfunction, turn off the power immediately and have it repaired at a qualified service center. Contact your vendor for details.
•Connect the power cord to the correct supply voltage.
•Carefully place connecting cables to avoid people from stepping or tripping on them. DO NOT allow anything to rest on the power cord and DO NOT place the power cord in an area where it can be stepped on.
•DO NOT use the BiGuard S5 in environments with high humidity or high temperatures.
•DO NOT use the same power source for the BiGuard S5 as other equipment.
•DO NOT use the BiGuard S5 and any accessories outdoors.
•If you wall mount the BiGuard S5, make sure that no electrical, water or gas pipes will be damaged dur- ing installation.
•Without surge protection, installation of the BiGuard S5 during a thunderstorm is not recommended.
•DO NOT expose the BiGuard S5 to dampness, dust, or corrosive liquids.
•DO NOT use the BiGuard S5 near water.
•Be sure to connect the cables to the correct ports.
•DO NOT obstruct the ventilation slots on the BiGuard S5 or expose it to direct sunlight or other heat sources. Excessive temperatures may damage your device.
•DO NOT store anything on top of the BiGuard S5.
•Only connect suitable accessories to the BiGuard S5.
•Keep packaging out of the reach of children.
•If disposing of the device, please follow your local regulations for the safe disposal of electronic prod- ucts to protect the environment.