Cisco Systems SMC-127 To remove a Dsdrsc, To remove a single node, To remove a DRP pair, SMC-153

Configuring Secure Domain Routers on Cisco IOS XR Software

How to Configure Secure Domain Routers

	Command or Action	Purpose
Step 4
	no location partially-qualified-nodeid	Removes a node, DRP pair, or RP pair from a non-owner SDR.
	or	• When a node is removed from an SDR, it is automatically
	no location pair-name
		added to the owner SDR inventory. This node may now be
	Example:	assigned to a different SDR, as described in Adding Nodes
		to an SDR in a Cisco CRS-1 Router, page SMC-148.
	RP/0/RP0/CPU0:router(admin-config-sdr:rname
	2)#	• Removing all the slots from an SDR deletes that SDR.
	no location 0/0/*
	or	To remove a DSDRSC
	RP/0/RP0/CPU0:router(admin-config-sdr:rname
	2)#	The DSDRSC cannot be removed if other nodes are in the SDR
	no location drp1
		configuration. To remove the DSDRSC, you must first remove
	or
		all other nodes in the SDR.
	RP/0/RP0/CPU0:router(admin-config-sdr:rname
	)#
	no location 0/RP*/*	To remove a single node
		Enter the no location partially-qualified-nodeid command. The
		value of the partially-qualified-nodeidargument is entered in
		the rack/slot/* notation. Node IDs are always specified at the
		slot level, so the wildcard (*) is used to specify the CPU.
		To remove a DRP pair
		Enter the no location pair-namecommand. The pair-name
		argument is the name assigned to the DRP pair.
		To remove an RP pair
		Enter the no location partially-qualified-nodeid command. The
		value of the partially-qualified-nodeidargument for RPs is
		entered in the rack/RP*/* notation. This command removes both
		RPs in a pair.
Step 5
	end	Saves configuration changes.
	or	• When you issue the end command, the system prompts you
	commit	to commit changes:
		Uncommitted changes found. Commit them?
	Example:	– Entering yes saves configuration changes to the running
	RP/0/RP0/CPU0:router	configuration file, exits the configuration session, and
	(admin-config-sdr:rname2)# end	returns the router to EXEC mode.
	or
		– Entering no exits the configuration session and returns
	RP/0/RP0/CPU0:router(admin-config-sdr:rname
		the router to EXEC mode without committing the
	2)# commit
		configuration changes.
		– Entering cancel leaves the user in the same command
		mode without committing the configuration changes.
		• Use the commit command to save the configuration changes
		to the running configuration file and remain within the
		configuration session.

Cisco IOS XR System Management Configuration Guide

SMC-153