Cisco Systems SMC-127 manual SMC-160

Configuring Secure Domain Routers on Cisco IOS XR Software

How to Configure Secure Domain Routers

	Command or Action	Purpose
Step 7
	Log in to the non-owner SDR using admin plane	Logs a root-system user into the SDR using admin plane
	authentication:	authentication.
	Username:xxxx@admin	Note Where it says “Username:xxxx@admin,” replace
	Password:xxxx	xxxx with your username.
	Example:
	Username:xxxx@admin
	Password:xxxx
Step 8
	configure	Enters configuration mode.
	Example:
	RP/0/RP0/CPU0:router# configure
Step 9
	username username	Defines an SDR username and enters username
		configuration mode.
	Example:	The user-nameargument can be only one word. Spaces and
	RP/0/RP0/CPU0:router(config)# username user1	quotation marks are not allowed.
Step 10
	secret password	Defines a password for the user.
	Example:
	RP/0/RP0/CPU0:router(config-un)# secret 5 XXXX
Step 11
	group root-lr	Adds the user to the predefined root-lr group.
		Note Only users with root-system authority or root-lr
	Example:	authority may use this option.
	RP/0/RP0/CPU0:router(config-un)# group root-lr
Step 12
	end	Saves configuration changes.
	or	• When you issue the end command, the system prompts
	commit	you to commit changes:
		Uncommitted changes found. Commit them?
	Example:	– Entering yes saves configuration changes to the
	RP/0/RP0/CPU0:router (config)# end	running configuration file, exits the configuration
	or	session, and returns the router to EXEC mode.
	RP/0/RP0/CPU0:router(config)# commit	– Entering no exits the configuration session and
		returns the router to EXEC mode without
		committing the configuration changes.
		– Entering cancel leaves the user in the same
		command mode without committing the
		configuration changes.
		• Use the commit command to save the configuration
		changes to the running configuration file and remain
		within the configuration session.
Step 13
	exit	Closes the active terminal session and log off the router.
	Example:
	exit

Cisco IOS XR System Management Configuration Guide

SMC-160