Quick Start Guide
Hardware Overview
The Front LEDs
When power on, it will lit green. When the system is booting, it will blink orange at the same time. While the system is ready, it will only lit green. When system booting failed or in the emergency mode, it will only lit orange.
Lit when connected to an Ethernet device.
Lit green for 1000Mbps; Lit orange for 10/100Mbps. Blinking when data is being Transmitted / Received.
Lit when connected to a broadband connection device. Lit orange for 10/100Mbps. Blinking when data is transmitted / received.
Lit green when a wireless connection is established. Lit orange when WPS is enabled. Flash green when data is sent / received.
Lit Green when successfully connected to an ADSL DSLAM, (“line sync”).
Lit orange when WAN port fails to get IP address. Flash green when WAN port gets IP ad dress successfully and when data is transmitted.
The Rear Ports
Connect the detachable antenna
WAN 10/100M Ethernet port (with auto crossover support); connect Cable Modem, VDSL, and Fiber Modem or PON optic lines with your
Connect your computer to a LAN port, using the included Ethernet cable (with
Connect the supplied power adapter to this jack
Connect the supplied
Press it to reset the device or restore to factory default settings
Power
ON/OFF switch
Push WPS button to trigger