Billion Electric Company 7402VL user manual

Page 69

Domains Filtering: This function checks the domain name only, not the IP address, in URLs accessed against your list of domains to block or allow. If it is matched, the URL request will be sent (Trusted) or dropped (Forbidden). For this function to be activated, both check-boxes must be checked. The checking procedure is:

VoIP/(802.11g) ADSL2+ Router

For example, if the URL is http://www.abc.com/abcde.html, it will be dropped as the keyword “abcde” occurs in the URL.

Domains Filtering: This function checks the domain name only, not the IP address, in URLs accessed against your list of domains to block or allow. If it is matched, the URL request will be sent (Trusted) or dropped (Forbidden). For this function to be activated, both check-boxes must be checked. The checking procedure is:

1.Check the domain in the URL to determine if it is in the trusted list. If yes, the connection attempt is sent to the remote web server.

2.If not, check if it is listed in the forbidden list, and if present then the connection attempt is dropped.

3.If the packet does not match either of the above two items, it is sent to the remote web server.

4.Please be note that the domain only should be specified, not the full URL. For example to block traffic to www.sex.com, enter “sex” or “sex.com” instead of “www.sex.com”. In the example below, the URL request for www.abc.com will be sent to the remote web server because it is listed in the trusted list, whilst the URL request for www.sex or www.sex.com will be dropped, because sex.com is in the forbidden list.

68

Chapter 4: Configuration

Image 69

Contents BiPAC 7402VL/VGL/VGP Version ReleaseVoIP/802.11g ADSL2+ Router User’s ManualCHAPTER 3 BASIC INSTALLATION CHAPTER 2 INSTALLING THE ROUTERCHAPTER 4 CONFIGURATION CHAPTER 1 INTRODUCTIONAPPENDIX A PRODUCT SUPPORT AND CONTACT INFORMATION CHAPTER 5 TROUBLESHOOTINGFirewall and Access Control QoS Quality of ServiceChapter 1 Introduction FeaturesIntroduction to your Router ModelsQuality of Service QoS Quick Installation WizardMulti-Protocol to Establish A Connection Universal Plug and Play UPnP and UPnP NAT TraversalFirmware Upgradeable Dynamic Host Configuration Protocol DHCP client and serverRich Packet Filtering Static and RIP1/2 RoutingImportant note for using this router Chapter 2 Installing the RouterPackage Contents Do not use the same power source for this router as other equipmentMeaning The Front LEDsRJ-45 connector RJ-11 connector7402VL The Rear Ports7402VGL 7402VGP5 CONSOLE Phone 6 1X 2X RJ-11 connector 7 ADSL Port 1 Power Switch 2 PWR 3 RESET LAN 4 1X - 3X RJ-45 connector8 Antenna 7402VGL/VGP only MeaningCabling Chapter 3 Basic Installation Chapter 3 Basic InstallationConnecting your router 7402VL/VGL7402VGP Figure 3.3 TCP / IP Figure 3.4 IP Address & DNS Configuration Configuring PCs in Windows in Window XP2. Double-click Local Area Connection. See Figure 4. Select Internet Protocol TCP/IP and click Properties. See FigureFigure 3.8 IP Address & DNS Configuration Configuring PCs in Windows2. Double-click Local Area “LAN” Connection. See Figure Figure 3.5 LAN Area Connection5. Then select the DNS Configuration tab. See Figure Configuring PC in Windows 95/98/MEFigure 3.11 DNS Configuration 3. Click Properties Figure 3.9 TCP / IP2. Select TCP/IP Protocol and click Properties. See Figure Configuring PC in Windows NT4.0Figure 3.12 TCP / IP Figure 3.13 IP AddressWeb Interface Username and Password Factory Default SettingsLAN Device IP Settings ISP setting in WAN sitePPPoE PPPoA RFC1483 Bridged RFC1483 Routed IPoA Information from your ISPFigure 3.14 User name & Password Prompt Widonw Configuring with your Web BrowserChapter 4 Configuration Quick Start ConfigurationSave Config to FLASH Wireless Association Table 7402VGL/VGP only StatusARP Table Routing Table Routing TableRIP Routing Table Leased Table DHCP TableExpired Table Permanent TableEmail Status VoIP StatusEvent Log Error Log NAT SessionsUPnP Portmap Quick Start VoIP/802.11g ADSL2+ Router Configuration LAN Local Area NetworkEthernet Ethernet Client Filter Ethernet Client Filter Default setting is set to DisableActive PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router Parameters EnableWireless Distribution System WDS Wireless Security 7402VGL/VGP only WPA Pre-Shared KeyPage →Associated Wireless Clients Wireless Client MAC Address Filter 7402VGL/VGP onlyAssociate Wireless Client displays a list of individual wireless device’s MAC Address that currently connects to the router DHCP Server WAN Wide Area Network RFC 1483 Routed Connections Pppoe RFC 1483 Bridged ConnectionsPPPoA Routed Connections Advanced Options PPPoA ConnectionGive DNSto DHCP Server Similar to the above, but gives the DNS server address to the DHCP server IPoA Routed Connections PPPoE Connections Advanced Options PPPoE VoIP/802.11g ADSL2+ Router Chapter 4ConfigurationPage ADSL Time Zone SystemRemote Access Firmware Upgrade Backup / Restore Restart Router User Management Firewall and Access Control General Settings Packet Filter Table 1 Predefined Port Filter Example Predefined Port Filters RulesApplication ProtocolPacket Filter - Add TCP/UDP Filter Packet Filter - Add Raw IP Filter Page Click Add TCP/UDP Filter Click DeleteConfiguring Packet Filter 3. Click Add TCP/UDP Filter5. The new port filter rule for HTTP is shown below Block Duration Intrusion DetectionIntrusion Name Table 2 Hacker attack types recognized by the IDSDetect Parameter Ascend KillURL Filter Domains Filtering This function checks the domain name only, not the IP address, in URLs accessed against your list of domains to block or allow. If it is matched, the URL request will be sent Trusted or dropped Forbidden. For this function to be activated, both check-boxes must be checked. The checking procedure is Restrict URL Features This function enhances the restriction to your URL rules Log information can be seen in the Status - Event Log after enabling Firewall LogPSTN Dial Plan VoIP Voice over Internet ProtocolPlease refer to the description of “Setting for Phone Port 1” Authentication Username Same as Phone NumberSetting for Phone Port WizardSIP Device Parameters General ConfigurationRegistrar Port from VoIP device Phone Configuration Login Account ConfigurationAuthentication Username Same as Phone Number Codec Preference Speed DialFor examples Action For ExampleDial without Prefix Dial only the Number of Digits and not the prefix Internet Service fail Power downSIP service is not available automaticallyDescription OptionFlash-hook 74xnumber#QoS Quality of Service High PrioritizationTable 4 DSCP Mapping Table Wireless ADSL RouterStandard DSCP DSCP Mapping TableOutbound IP Throttling LAN to WAN Inbound IP Throttling WAN to LAN VoIP Normal PCs Restricted Example QoS for your NetworkConnection Diagram Information and SettingsMission-critical application Voice applicationRestricted Application Advanced setting by using IP throttling Virtual Server “Port Forwarding” Add Virtual Server IP Address Application HTTPSever Time Schedule Always On Protocol tcpEdit DMZ Host Global IP Address Edit One-to-One NAT Network Address TranslationSelect the Apply button to apply your changes Table 5 Well-known and registered Ports Example List of some well-known and registered port numbersPort Number ProtocolTime Schedule Delete a Time Slot Edit a Time SlotClick Edit Configuration of Time ScheduleStatic Route AdvancedDynamic DNS Check Email Embedded Web Server Device ManagementUniversal Plug and Play UPnP SNMP Version SNMPv2c and SNMPv3SNMP V1 and SNMPFrom RFC1650 EtherLike-MIB From RFC 1213 MIB-IIFrom RFC 1493 Bridge MIB From RFC 1471 PPP/LCP MIBFrom RFC 1474 PPP/Bridge MIB From RFC 1473 PPP/IP MIBFrom RFC1573 IfMIB From RFC1695 atmMIBIGMP Save Configuration to Flash Logout Problems starting up the router Chapter 5 TroubleshootingProblems with the WAN Interface ProblemCan’t ping any PCs on the LAN Problems with the LAN InterfaceAPPENDIX A Product Support and Contact Information Contact Billion AUSTRALIAWORLDWIDE