Chapter 3
Advanced Configuration
5. The Adapter connects to the network.
Connecting to the Network via
NOTE: If the connection cannot be set up, the message, “Registration failed” appears. If this happens, use one of two options:
•• Push Button Press the router’s
•• PIN Click Skip, and then go to Enter the Adapter’s PIN Number, page 7.
6.The Connected to Your Network screen appears. To save your network’s settings, select Remember this network. (Saving a network’s settings will make it easier to reconnect to the network.) Click Finish to exit the Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
Enter the Adapter’s PIN Number
Enter the PIN Number
1.Access the
2.On the router’s
NOTE: Enter the Adapter’s PIN number without the hyphen.
3.The Adapter connects to the network, and the Connected to Your Network screen appears. To save your network’s settings, select Remember this network. (Saving a network’s settings will make it easier to reconnect to the network.) Click Finish to exit the Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
7 |