Chapter 3
Advanced Configuration
5.The Checking Connection screen appears.
Checking Connection
6.The Connected to Your Network screen appears. To save your network’s settings, select Remember this network. (Saving a network’s settings will make it easier to reconnect to the network.) Click Finish to exit the Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.
How to Connect Using Wi-Fi Protected Setup
On the Connect to a Wireless Network screen, the 
) indicates a network that supports
NOTE: Before you begin, make sure the router and the computer with the Adapter are in the same room.
1.On the Connect to a Wireless Network screen, select your network, and then click Connect.
Select the Wireless Network
2.The Quickly Connect Using Push Button screen appears.
Quick Connect Using Push Button
3.Press the router’s 
until an LED lights up. If your router does not have this button, click Skip and go to Enter the Adapter’s PIN Number, page 7.
4.Within two minutes, click Connect on the Quickly Connect Using Push Button screen.
6 |