Cisco Systems ISA500, ISA550WBUN1K9, ISA570W quick start Wall Mounting

•Mechanical Loading: Be sure that the security appliance is level and stable to avoid any hazardous conditions.

To place your security appliance on a desktop, install the supplied four rubber feet on the bottom of the security appliance. Place the security appliance on a flat surface.

Wall Mounting

The wall mounting hardware is user-supplied. We recommend that you use the following mounting screws to install your security appliance to the wall. The wall-mounting features on the bottom of the unit allow the front of the unit to face either upward or downward.

2

1

3

4

196243

1 8 mm/0.32 in 2 25 mm/0.98 in 3 6.5 mm/0.26 in 4 18.6 mm/0.73 in

WARNING Insecure mounting might damage the device or cause injury. Cisco is not responsible for damages incurred by improper wall-mounting.

STEP 1 Determine where you want to mount the security appliance. Verify that the surface is smooth, flat, dry, and sturdy.

STEP 2 Secure two M3 x 0.63 inch (16 mm) pan head wood screws, with anchors, into the wall 9.21 inches (234 mm) apart horizontally. Leave about 1/8 inch (3 to 4 mm) of the screw threads beneath the screw head exposed.

STEP 3 Place the wall-mount slots over the screws and slide the unit down until the screws fit snugly into the wall-mount slots.

Cisco ISA500 Series Integrated Security Appliances Quick Start Guide 7