Cisco Systems 2821 Series, 2851 Series manual Safety Guidelines, Safety with Electricity

Page 9

Safety Warnings and Guidelines

Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected. Statement 4

Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit. Statement 1003

Safety Guidelines

Follow these guidelines to ensure general safety:

•Keep the chassis area clear and dust-free during and after installation.

•Place the removed chassis cover in a safe place.

•Keep tools away from walk areas where you or others could fall over them.

•Do not wear loose clothing that may get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.

•Wear safety glasses when working under conditions that may be hazardous to your eyes.

•Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Safety with Electricity

Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Follow these guidelines when working on equipment powered by electricity:

•Locate the room’s emergency power-off switch. Then, if an electrical accident occurs, you can quickly shut the power off.

•Before working on the system, turn off the power and unplug the power cord.

•Disconnect all power.

•Do not work alone if potentially hazardous conditions exist.

•Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, and missing safety grounds.

•Never assume that power is disconnected from a circuit. Always check.

Installing and Upgrading Fans in the Cisco 2821 and Cisco 2851 Series Routers

 

78-18643-02

9

 

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents This document contains the following sections Safety Warnings Safety Warnings and GuidelinesStatement 1071-Warning Definition Conservare Queste Istruzioni 78-18643-02 GEM Disse Anvisninger 78-18643-02 Page Safety with Electricity Safety GuidelinesPreventing Electrostatic Discharge Damage Items in the Fan Replacement KitLocation of the Cisco 2821 and Cisco 2851 Router Fans Removing the Router Cover Location of the arrow Removing the Bezel Removing the Cover from a Cisco 2821 or Cisco 2851 Router Removing the Fan Unit Lifting the Connector from the ReceptacleRemoving Fan Mounting Screws from the Chassis Installing the Fan Unit Insert tabs and center the cover Close the cover Replacing the Router Cover

2851 Series, 2821 Series specifications

Cisco Systems has long been a leader in networking technology, and the 2821 and 2851 Series routers exemplify the company’s commitment to delivering robust, versatile, and scalable networking solutions. Designed for small to medium-sized businesses and enterprise branch offices, these series are ideal for organizations looking to enhance their network functionality while maintaining cost-effectiveness.

The Cisco 2821 Series is designed for flexibility and performance. It supports a variety of advanced security features, including IPsec VPN, firewall capabilities, and intrusion prevention. Its modular design allows for the addition of various interface cards, which makes it highly customizable based on the specific needs of the organization. The 2821 router can handle up to 24,000 sessions, making it suitable for multiple simultaneous connections without compromising performance.

Another significant characteristic of the 2821 Series is its support for voice over IP (VoIP) technologies. It can integrate voice and data on the same network, reducing costs and simplifying management. Furthermore, it supports Cisco's Unified Communications, allowing organizations to introduce advanced telephony features seamlessly.

Upgrading to the Cisco 2851 Series provides even greater performance and capabilities. The 2851 offers increased throughput and improved scalability, supporting a more extensive range of applications. It also includes enhanced support for integrated security features, enabling organizations to further protect their data and network assets.

Both series utilize Cisco's IOS Software, which enables a variety of services, from quality of service (QoS) to network management tools. These routers are designed to handle multiple applications simultaneously, making them ideal for today’s network environments that demand high availability and performance.

The 2821 and 2851 Series routers also feature redundant power supplies and fan modules, ensuring maximum uptime and reliability. Their robust build quality and durability make them suitable for various environments, from office spaces to industrial settings.

In summary, Cisco's 2821 and 2851 Series are built to provide robust networking solutions for businesses of all sizes. With features focused on modularity, security, and integrated voice capabilities, these routers are adept at meeting the diverse needs of contemporary organizations while setting the foundation for future growth and scalability.
Top Page Image Contents