Cisco Systems 2600XM Series quick start Attaching Brackets

Page 10

The brackets for 19-, 23-, and 24-inch racks are shown in Figure 1.

Figure 1 Brackets for Rack-Mounting of Routers with 1-RU Chassis Height

Bracket for use with a 19-inch rack

Bracket for use with a 23-inch or 24-inch rack

27711

Attaching Brackets

Attach the mounting brackets to the chassis as shown in Figure 2 through Figure 8, using the screws provided. Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to install the bracket screws.

Figure 2 Bracket Installation for Front Mounting in 19-Inch Rack

62676

Note: The second bracket attaches to the other side of the chassis.

Figure 3 Bracket Installation for Front Mounting: 19-Inch Rack with 17.75-Inch Opening, and 23- or 24-Inch Rack

Note: The second bracket attaches

to the other side of the chassis. Brackets for 19-inch rack

Brackets for

23-inch or 24-inch rack

62881

10

Image 10

Contents Cisco 2600XM Series and Cisco 2612 Routers Replacement, Repair, or Refund Policy for Hardware Cisco 90-Day Limited Hardware Warranty TermsDuration of Hardware Warranty To Receive a Return Materials Authorization RMA NumberInstall Chassis Documents, Equipment, and ToolsImportant Safety Instructions OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Metal object to the terminals. Statement Installing the Chassis Rack-Mounting the ChassisBracket Installation for Front Mounting in 19-Inch Rack Attaching BracketsBracket Installation for Rear Mounting in 19-Inch Rack Installing Chassis in Rack Attaching Rubber FeetGrounding the Chassis Installing on a DesktopAttaching to Wall Voltages. Statement Connect CablesSystem Management Connections Port Color Connected To CableConnecting the Router to DC Power Power ConnectionsConnecting Routers to AC Power DC Wiring RequirementsWiring Procedure for Nominal 48 VDC Input Step TipWAN, LAN, and Voice Connections Connecting Routers to the Cisco Redundant Power SystemPort or Connection Port Type, Color Connected To Cable Front Panel Indicators Power Up the RouterChecklist for Power-Up Power-Up ProcedurePerform Initial Configuration Initial Configuration Using the Setup Command Facility Enter a host name for the router this example uses Initial Configuration Using the CLI Manual Configuration Configuration appearsInterface Numbering WAN and LAN Interface NumberingTo access documentation on Cisco.com Where to Go NextVoice Interface Numbering Documentation Feedback To access documentation using Cisco Connection Online CCOObtaining Documentation Cisco.comObtaining Technical Assistance Submitting a Service RequestDefinitions of Service Request Severity Cisco Technical Support WebsiteObtaining Additional Publications and Information USA