Cisco Systems WIC-2AM-V2, WIC-1AM-V2 manual Configuring the Country Code, Examples

Page 7

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card

How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC

 

Command or Action

Purpose

Step 12

 

 

exit

Exits global configuration mode.

 

Example:

 

 

Router(config)# exit

 

Step 13

 

 

exit

Exits privileged EXEC mode.

 

Example:

 

 

Router# exit

 

 

 

 

Examples

 

 

The following provides an example configuration.

 

 

Router(config)# interface async 33

 

 

Router(config-if)# ip unnumbered f0/0

 

 

Router(config-if)# encapsulation ppp

 

 

Router(config-if)# dialer in-band

 

 

Router(config-if)#dialer string 14085551234

 

 

Router(config-if)# dialer-group 1

 

 

Router(config-if)#async mode interactive

 

 

Router(config-if)#peer default ip address pool pool123

 

 

 

Note

The entry pool123 is a name chosen for the pool used for defining the range of IP addresses

 

 

for remote clients.

 

 

 

Configuring the Country Code

Complete the following commands to configure the country code on the modem WIC.

SUMMARY STEPS

1.enable

2.configure terminal

3.modemcap entry init-string:MSC=+GCI=country code;configuration values;

4.line line-number [ending-line-number]

5.modem autoconfigure type init-string

6.clear modem slot/port

7.exit

8.exit

9.exit

Cisco IOS Release 12.3(14)T

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Contents Platform Memory Requirements Asynchronous Dial-on-Demand Routing and Dial-Backup Remote Router Management and Out-of-Band AccessLow-Density Analog RAS Access Command or Action Purpose Configuring the Asynchronous InterfaceExample Command or Action Purpose Examples Configuring the Country CodeShow modemcap name command Country Code Country Code TableConfiguring the Line on the Analog Modem WIC Upgrading the Modem Firmware Enters information needed for the modem firmware Verifying the Modem Firmware Upgrade Modem 0/3/0 Debugging Call ConnectExamples Debugging Call Disconnect Debug modem command shows the state of the TTY lines Example Configuring for Asynchronous Dial Backup Example Standards Title Additional ReferencesRelated Documents StandardsTechnical Assistance Command ReferenceMIBs RFCsDefaults Command Modes Command History Usage Guidelines Upgrade modem firmwareReleaseModification Examples Command DescriptionGlossary

WIC-2AM-V2, WIC-1AM-V2 specifications

Cisco Systems is a leader in networking technology and offers a wide range of products designed to facilitate connectivity and enhance network performance. Among these products are the WIC-1AM-V2 and WIC-2AM-V2, which are modular interface cards designed specifically for Cisco routers. These interface cards provide additional capabilities that are essential for modern network infrastructures.

The WIC-1AM-V2 is a single-port asynchronous serial interface card, while the WIC-2AM-V2 offers two ports. Both cards are designed to support asynchronous serial connections and are commonly used for connecting devices like point-of-sale systems, industrial equipment, and other legacy systems that require serial communications. One of the key characteristics of these interface cards is their ability to integrate seamlessly into existing Cisco routing platforms, thus enhancing the flexibility and scalability of the network.

One of the main features of the WIC-1AM-V2 and WIC-2AM-V2 is their support for a range of communication protocols, including but not limited to, PPP (Point-to-Point Protocol), SLIP (Serial Line Internet Protocol), and HDLC (High-Level Data Link Control). This versatility is crucial for organizations that rely on various devices with differing communication standards. Furthermore, these cards support a maximum data rate of 115.2 kbps, ensuring that data can be transmitted efficiently over the serial connections.

Another significant technology embodied in these WICs is their ability to be hot-swappable, allowing for upgrades and maintenance without requiring complete network downtime. This feature is essential for businesses that demand high availability and minimal disruption to their operations. The compatibility of the cards with multiple Cisco router models further enhances their appeal, making them a versatile choice for network managers.

In conclusion, Cisco's WIC-1AM-V2 and WIC-2AM-V2 cards provide essential functionality for modern networks that require serial connectivity. With their robust support for various communication protocols, hot-swappable design, and seamless integration with Cisco routers, these interface cards are a valuable asset for any organization looking to enhance its network capabilities. Their reliability and performance make them a go-to choice for a wide range of applications, ensuring that businesses can maintain connectivity across diverse environments.
Top Page Image Contents