Cisco Systems WBP54G manual Set up and Connect the Bridge, Package Contents

Page 1
Click Click Here to Start on the Welcome screen.

®

A Division of Cisco Systems, Inc.

1 Set up and Connect the Bridge

Package Contents

Wireless-G Bridge for Phone Adapters (with Attached Combo-power/Ethernet Cable)

CD-ROM with Setup Wizard and User Guide

Quick Installation Guide

Registration Card

2.4802.11gGHz Wireless-G

 

Bridge for Phone Adapters

Wireless

Quick Installation

 

Model No. WBP54G

 

The Setup Wizard will guide you through the steps to configure and connect the Bridge.

A Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click Start and choose Run. In the field that appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).

B

C After reading the License Agreement, click Next if you agree, or click Cancel to end the installation.

D This screen will inform you about which Linksys phone adapters and IP phones work with the Bridge. Make sure your phone adapter or IP phone is listed on-screen. Click Next.

B

C

D

NOTE:The power adapter for your Linksys phone adapter or IP phone will be used to power the Bridge.

E You will use the PC running this Setup Wizard to set up the Bridge. Disconnect the power jack from the back of the Linksys phone adapter or IP phone. (You will use this power adapter to power the Bridge.) If your network router or this PC is in a different room, disconnect the power adapter from the electrical outlet. Move the power adapter and Bridge to the room where your router or PC is located.

Click Next.

F Connect the power jack to the Power port of the Bridge. Then plug the power adapter into an electrical outlet.

Click Next.

G You will use the combination Ethernet network and power cable attached to the Bridge. Connect the Ethernet network cable of the Bridge to an Ethernet network (LAN) port of the router or PC. (Do not use the power cable now; you will use it later.)

Make sure the Bridge’s Ethernet LED is solidly lit or flashing. Click Next.

E

F

G

NOTE:If you connect the Bridge to a router, make sure the Bridge and PC running the Setup Wizard are connected to the Ethernet network (LAN) ports of the same router.

H A list of all Bridges for Phone

Adapters that can be detected by the Setup Wizard will be displayed. Select the Bridge you are installing and click Next. If the Bridge you want is not displayed, click the Refresh List button to search again.

I This screen will display a list of wireless networks that can be detected. Select the wireless network you want.

If the network you want is not displayed, click the Refresh List button to search again.

To manually enter the SSID of the network you want, click the SSID radio button and enter the SSID of your wireless network.

Click Next.

J Configure the wireless security settings. Select the method your network is using, WPA, WPA2,

WEP (128-Bit), or WEP (64- Bit). Then proceed to the appropriate instructions. If you are not using wireless security, select Disabled, and proceed to step K.

H

I

IMPORTANT:Some wireless access points or routers do not broadcast their status information. If you do not see the network you want, click the SSID radio button and manually enter its SSID.

Image 1
Contents Package Contents Set up and Connect the BridgeWPA WEP KeysWPA2
Related manuals
Manual 55 pages 1.7 Kb

WBP54G specifications

The Cisco Systems WBP54G is a wireless Bridge Access Point that enhances the connectivity of wired Ethernet devices to a wireless network. This device is particularly useful for connecting devices that do not have built-in wireless capabilities, such as printers, game consoles, or surveillance cameras, enabling seamless integration into existing Wi-Fi networks.

One of the main features of the WBP54G is its capability to bridge wired and wireless networks with ease. The device operates effortlessly within the 802.11g wireless standard, offering a maximum data rate of 54 Mbps. It ensures reliable communication and provides backward compatibility with 802.11b devices, making it a versatile choice for a variety of environments.

The WBP54G is equipped with advanced security protocols, including WEP, WPA, and WPA2 encryption methods, which help protect sensitive data transmitted over the network. This ensures that users can connect their devices without compromising security. Moreover, the WBP54G features a user-friendly web-based interface for easy configuration and management, making setup straightforward even for non-technical users.

Another significant characteristic of the WBP54G is its robust design that allows for flexible placement options. It can be powered via Power over Ethernet (PoE), minimizing the need for additional power outlets and simplifying installation in locations where power access may be limited.

Additionally, the device supports multiple operational modes, including Bridge Mode and Access Point Mode, facilitating a variety of networking needs. The bridge mode allows for the connection of multiple Ethernet devices, creating a comprehensive network solution, while access point mode can be utilized to expand the reach of an existing wireless network.

In terms of performance, the Cisco WBP54G offers a range of up to 100 meters indoors and up to 300 meters outdoors, making it suitable for both home and office use. The device is also designed to handle a moderate number of concurrent connections, ensuring efficient management of network traffic.

Overall, the Cisco Systems WBP54G stands as a reliable solution for enhancing wireless connectivity, blending advanced technology with user-friendly features to meet the needs of various users looking to extend their network’s capabilities.