Siemens 125-5050 Application 2860 VAV Cooling Only, Application 2861 VAV Cooling or Heating

Models: 125-5050

1 38
Download 38 pages 8.66 Kb
Page 17
Image 17

Chapter 2 – Applications

3.“Safeties by Others”: This note implies that the associated equipment has safety features installed, for example adding mechanical stops to the dampers.

Application 2860 VAV Cooling Only

In Application 2860, the controller modulates the supply air damper of the terminal box for cooling. In order for it to work properly, the central air-handling unit must provide cool supply air.

See the following figure.

Application 2861 VAV Cooling or Heating

In Application 2861, the controller modulates the supply air damper of the terminal box for cooling and heating. In order for it to work properly, the central air-handling unit must provide cool supply air in cooling mode and warm air during heating mode.

See the following figure.

Application 2862 VAV with Electric Reheat or Baseboard Radiation

 

In Application 2862, the controller modulates the supply air damper of the terminal box

 

for cooling and controls stages of electric reheat or baseboard radiation for heating.

 

When in heating, the terminal box either maintains minimum airflow or modulates the

 

supply air damper. In order for the terminal box to work properly, the central air-

 

handling unit must provide supply air.

 

See the following figure.

 

17

 

 

 

 

Siemens Industry, Inc.

BACnet ATEC Owner's Manaul

125-5050, Rev. AA

4/20/2010

 

Page 17
Image 17
Siemens 125-5050 owner manual Application 2860 VAV Cooling Only, Application 2861 VAV Cooling or Heating