Chapter 2 – Applications

DO 3, DO 4, and DO 5 may be used as separate DOs or in pairs to control a motor as shown in the example.

NOTE:

If using either a motor or DOs as auxiliary points, be sure to set MTR SETUP to the correct value. If using a pair of DOs to control a motor, then the DOs cannot be unbundled. Only MTR COMD can be unbundled to control the motors.

Contact your local Siemens Industry representative for other combinations of DOs and motors.

 

23

 

 

Siemens Industry, Inc.

BACnet ATEC Owner's Manaul

125-5050, Rev. AA

4/20/2010

Page 23
Image 23
Siemens 125-5050 owner manual Applications