Cisco Systems WRT610N manual Radius

Chapter 3

Advanced Configuration

RADIUS

This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.)

IMPORTANT: If you are using WEP encryption, each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly.

RADIUS

RADIUS Server  Enter the IP address of the RADIUS server.

RADIUS Port  Enter the port number of the RADIUS server. The default is 1812.

Shared Key  Enter the key shared between the Router and the server.

Encryption  Select a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. The default is 64 bits 10 hex digits.

Passphrase  Enter a Passphrase to automatically generate WEP keys. Then click Generate.

Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually.

TX Key  Select a default TX (Transmit) Key (choose which Key to use). The default is 1.

WEP

WEP is a basic encryption method, which is not as secure as WPA.

IMPORTANT: If you are using WEP encryption, each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly.

WEP

Encryption  Select a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. The default is 64 bits 10 hex digits.

Passphrase  Enter a Passphrase to automatically generate WEP keys. Then click Generate.

Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually.

TX Key  Select a default TX (Transmit) Key (choose which Key to use). The default is 1.

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.

Simultaneous Dual-Band Wireless-N Gigabit Router 16