Cisco Systems 1800 Series quick start Installing the Router, Instructions. Statement

Page 10

Warning

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or

 

equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s

 

instructions. Statement 1015

 

 

Installing the Router

Note Cisco 1800 series routers are normally ordered with modules and interface cards. Before you remove or install any modules or interface cards, refer to the documents that accompany those items or to the online Cisco 1800 series hardware installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800/hw/index.htm

You can set any Cisco 1800 series router on a desktop or mount it on the wall. See the applicable instructions in the following sections:

•Wall-Mounting the Router, page 10

•Installing the Router on a Desktop, page 12

Caution To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always hold the chassis by the metal body.

Wall-Mounting the Router

Warning

This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before

 

beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a

 

hazardous situation to people and damage to the system. Statement 248

 

 

The Cisco 1841 router can be wall-mounted by using two No. 6, 3/4-inch screws and the mounting features on the bottom of the router. We recommend using pan-head or round-head screws (not included).

The wall-mounting features on the router are shown in Figure 1.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Including License and Warranty Replacement, Repair, or Refund Policy for Hardware Cisco One-Year Limited Hardware Warranty TermsDuration of Hardware Warranty To Receive a Return Materials Authorization RMA NumberUser Documentation OverviewDocuments, Equipment, and Tools Product Serial Number LocationItems Included with Cisco 1841 Routers Install ChassisSafety Information Items Not IncludedPage OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Ambient temperature of 40 deg. Statement StatementInstalling the Router Instructions. StatementWall-Mounting Features on the Cisco 1841 Router Installing the Router on a Desktop Connecting Cables Grounding the ChassisFrom the router first. Statement WAN and LAN ConnectionsPort or Connection Port Type, Color1 Connected To Cable Checklist for Power Up Power Up the RouterPower Connections Console, Auxiliary, and USB Port ConnectionsPower-Up Procedure System Configuration DialogVerify the Front Panel LED Indications Verify the Hardware ConfigurationInterface Numbering Color Description LocationPerform Initial Configuration Slot Type Slot Numbering Range Example1Initial Configuration Using Setup Command Facility Summary of the available interfaces is displayed Initial Configuration Using Cisco CLI-Manual Configuration Verify the Initial Configuration Where to Go NextObtaining Documentation Cisco.com Documentation FeedbackObtaining Technical Assistance Ordering DocumentationDefinitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information Page Page Page USA
Top Page Image Contents