Cisco Systems 1800 Series quick start Summary of the available interfaces is displayed

Page 20

Step 6 Enter the virtual terminal password, which prevents unauthenticated access to the router through ports other than the console port:

The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: xxxxxx

Step 7 Respond to the following prompts as appropriate for your network:

Configure SNMP Network Management? [yes]:

Community string [public]:

A summary of the available interfaces is displayed.

Note The interface numbering that appears depends on the type of Cisco modular router platform and on the installed interface modules and cards.

Current interface summary

 

 

Controller

Timeslots

D-Channel Configurable modes Status

T1

0/0/0

24

23

pri/channelized

Administratively up

T1

0/0/1

24

23

pri/channelized

Administratively up

T1

0/1/0

24

23

pri/channelized

Administratively up

T1

0/1/1

24

23

pri/channelized

Administratively up

Any interface listed with OK? value "NO" does not have a valid configuration

 

Interface

IP-Address

OK?

Method

Status

Prol

FastEthernet0/0

unassigned

NO

unset

up

up

FastEthernet0/1

unassigned

NO

unset

up

dow

Step 8 Select one of the available interfaces for connecting the router to the management network:

Enter interface name used to connect to the

management network from the above interface summary: fastethernet0/0

Step 9 Respond to the following prompts as appropriate for your network:

Configuring interface FastEthernet0/0:

Use the 100 Base-TX (RJ-45) connector? [yes]: yes

Operate in full-duplex mode? [no]: no

Configure IP on this interface? [yes]: yes

IP address for this interface: 172.1.2.3

Subnet mask for this interface [255.255.0.0] : 255.255.0.0

Class B network is 172.1.0.0, 26 subnet bits; mask is /16

Step 10 The configuration is displayed:

The following configuration command script was created:

hostname Router

enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx

line vty 0 4 password xxxxxx

snmp-server community public

!

no ip routing

!

interface FastEthernet0/0 speed 100

half-duplex

ip address 172.1.2.3 255.255.0.0

!

interface FastEthernet0/1 shutdown

no ip address

20

Image 20
Contents Including License and Warranty Cisco One-Year Limited Hardware Warranty Terms Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware To Receive a Return Materials Authorization RMA NumberOverview Documents, Equipment, and ToolsUser Documentation Product Serial Number LocationInstall Chassis Safety InformationItems Included with Cisco 1841 Routers Items Not IncludedPage OBS! Spara Dessa Anvisningar Guarde Estas Instruções GEM Disse Anvisninger Ambient temperature of 40 deg. Statement StatementInstalling the Router Instructions. StatementWall-Mounting Features on the Cisco 1841 Router Installing the Router on a Desktop Connecting Cables Grounding the ChassisPort or Connection Port Type, Color1 Connected To Cable WAN and LAN ConnectionsFrom the router first. Statement Power Up the Router Power ConnectionsChecklist for Power Up Console, Auxiliary, and USB Port ConnectionsPower-Up Procedure System Configuration DialogVerify the Hardware Configuration Interface NumberingVerify the Front Panel LED Indications Color Description LocationPerform Initial Configuration Slot Type Slot Numbering Range Example1Initial Configuration Using Setup Command Facility Summary of the available interfaces is displayed Initial Configuration Using Cisco CLI-Manual Configuration Obtaining Documentation Where to Go NextVerify the Initial Configuration Documentation Feedback Obtaining Technical AssistanceCisco.com Ordering DocumentationObtaining Additional Publications and Information Submitting a Service RequestDefinitions of Service Request Severity Page Page Page USA