Emulex 4 Gb FC Host Bus manual Selv Compliance, Power Cord Connection, Battery Warning

Page 34

SELV Compliance

Safety status of I/O connections comply to SELV requirements.

Power Cord Connection

Caution – Sun products are designed to work with power systems having a grounded neutral (grounded return for DC-powered products). To reduce the risk of electric shock, do not plug Sun products into any other type of power system. Contact your facilities manager or a qualified electrician if you are not sure what type of power is supplied to your building.

Caution – Not all power cords have the same current ratings. Do not use the power cord provided with your equipment for any other products or use. Household extension cords do not have overload protection and are not meant for use with computer systems. Do not use household extension cords with your Sun product.

The following caution applies only to devices with multiple power cords:

Caution – For products with multiple power cords, all power cords must be disconnected to completely remove power from the system.

Battery Warning

Caution – There is danger of explosion if batteries are mishandled or incorrectly replaced. On systems with replaceable batteries, replace only with the same manufacturer and type or equivalent type recommended by the manufacturer per the instructions provided in the product service manual. Do not disassemble batteries or attempt to recharge them outside the system. Do not dispose of batteries in fire. Dispose of batteries properly in accordance with the manufacturer’s instructions and local regulations. Note that on Sun CPU boards, there is a lithium battery molded into the real- time clock. These batteries are not customer replaceable parts.

The following caution applies only to devices with a Standby power switch:

Caution – The power switch of this product functions as a standby type device only. The power cord serves as the primary disconnect device for the system. Be sure to plug the power cord into a grounded power outlet that is nearby the system and is readily accessible. Do not connect the power cord when the power supply has been removed from the system chassis.

System Unit Cover

You must remove the cover of your Sun computer system unit to add cards, memory, or internal storage devices. Be sure to replace the cover before powering on your computer system.

Caution – Do not operate Sun products without the cover in place. Failure to take this precaution may result in personal injury and system damage.

26 Sun StorageTek Enterprise PCI Express 4 Gb FC Host Bus Adapters Emulex Installation Guide • December 2005

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Sun Microsystems, Inc Please Recycle Contents Page Using Unix Commands How This Book Is OrganizedTypographic Conventions Shell PromptsRelated Documentation Third-Party Web Sites Accessing Sun DocumentationContacting Sun Technical Support Sun Welcomes Your Comments Installing, Connecting, and Testing the Host Bus Adapter System RequirementsInstalling the HBA To Verify the Packaging ContentsTo Install the HBA Hardware Record Ieee and serial numbersRemoving the Bracket Screws Optical Cable Specifications To Attach the Optical CableWhen attaching the optical cable, be sure to To Apply Power To Verify Proper Installation in Sparc PlatformsPage Installing, Connecting, and Testing the Host Bus Adapter Page Installing, Connecting, and Testing the Host Bus Adapter To Verify Attached Storage to the Installed HBA Show-children Installing the HBA Driver with the Solaris 10 OS PackagesSun Product Information Page at Emulex PatchesDiagnostic Support P E N D I X a Page Declaration of Conformity Page FCC Class a Notice Regulatory Compliance StatementsFCC Class B Notice ICES-003 Class a Notice Avis NMB-003, Classe a ICES-003 Class B Notice Avis NMB-003, Classe BBsmi Class a Notice CCC Class a NoticeGOST-R Certification Mark Symbols Safety Agency Compliance StatementsSafety Precautions Placement of a Sun Product Noise LevelSelv Compliance Power Cord ConnectionBattery Warning System Unit CoverConformité aux normes de sécurité Conformité Selv Connexion du cordon d’alimentationAvis de conformité des appareils laser Mise en garde relative aux batteriesCouvercle de lunité Mise en garde relative au système en rackEinhaltung sicherheitsbehördlicher Vorschriften Gehäuseabdeckung Anschluss des Netzkabels Warnung bezüglich BatterienWarnungen bezüglich in Racks eingebauter Systeme CD- und DVD-Geräte Normativas de seguridadHinweis zur Laser-Konformität Medidas de seguridadNivel de ruido Colocación de un producto SunCumplimiento de la normativa para instalaciones Selv La utilización de láser Nordic Lithium Battery Cautions
Top Page Image Contents