Dynex DX-WGPNBC, DX-WGPDTC manual Contents, Introduction, Installing the software and hardware

Page 2

DX-WGPNBC_WGPDTC_Combo.fm Page 2 Thursday, June 22, 2006 12:31 AM

2

Dynex DX-WGPNBC or

DX-WGPDTC Wireless LAN

Card

Contents

 

Introduction

2

Installing the software and hardware

2

Configuring the wireless network

3

Troubleshooting

6

Legal notices

7

Français

8

Español

15

Introduction

 

Thank you for purchasing a Dynex Wireless LAN 802.11g Enhanced notebook or desktop card. This package contains:

•A Wireless LAN 802.11g Enhanced notebook or desktop card

•A printed user guide

•A CD containing the wireless network card utility and drivers and this user guide

If anything is missing, contact Dynex at (800) 305-2204.

Installing the software and hardware

Use the following procedures to set up your wireless network.

To install wireless networking on a Windows XP computer:

Caution: Do not insert the notebook or desktop card until instructed to do so.

1Install the access point. For more information, see the access point documentation.

2Turn on your computer.

3Insert the included CD in the optical drive.

4If the installation program does not start automatically, use Windows Explorer or My Computer to browse the CD and locate the file named setup.exe, then double-click setup.exe to start installing the software.

5Follow the on-screen instructions to install the software.

6If you are installing a desktop card, turn off your computer, install the card, then turn on your computer again. The Found New Hardware Wizard opens.

-OR-

Insert your notebook card into the appropriate slot in your notebook. The Found New Hardware Wizard opens.

Contents

7Click Install the software automatically (Recommended), then click Next.

8If a warning box opens, click Continue Anyway. Your computer copies files to your hard drive.

9Click Finish.

To install wireless networking on a Windows 98, Windows 2000, or Windows ME computer:

Caution: Do not insert the notebook or desktop card until instructed to do so.

1Install the access point. For more information, see the access point documentation.

2Turn on your computer.

3Insert the included CD in the optical drive.

4If the installation program does not start automatically, use Windows Explorer to browse the CD and locate the file named setup.exe, then double-click setup.exe to start installing the software.

5Follow the on-screen instructions to install the software.

6If you are installing a desktop card, turn off your computer, install the card, then turn on your computer again. The Found New Hardware Wizard opens.

-OR-

Insert your notebook card into the appropriate slot in your notebook. The Found New Hardware Wizard opens.

7Right-click on the My Computer desktop icon, click Properties, then click Hardware Device Manager. Make sure that the card is listed as one of the devices in your computer.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents DX-WGPNBC & DX-WGPDTC Introduction ContentsInstalling the software and hardware Configuring the wireless network Configuring the wireless networkUninstalling the software and hardware Remove the card Restart your computerChannel-Displays the channel the network is on Link Information tabAvailable Networks tab Fields on the Link Information tab includeTo connect to a network Connecting to a networkEncryption-Use the default encryption Troubleshooting TroubleshootingProfile Setting tab About tabIC statement for DX-WGPDTC Legal noticesFederal Communication Commission Interference Statement Important Note IC Radiation Exposure StatementTable des matières Installation des logiciels et du matérielTable des matières Un guide de l’utilisateur format papierInstallation des logiciels et du matériel Onglet Link Information Information de liaison Configuration du réseau sans filConfiguration du réseau sans fil Retirer l’adaptateur Redémarrer lordinateurConnexion à un réseau Onglet Available Networks Réseaux disponiblesUtilisant le même Ssid Pour le raccordement à un point d’accèsCliquer sur Next Suivant. L’écran suivant s’affiche 10 Régler les valeurs des champs suivantsOnglet de paramétrage du profil Profile Problèmes et solutionsProblèmes et solutions Onglet About À propos deRemarque importante pour le modèle DX-WGPDTC Avis juridiquesRemarque importante pour le modèle DX-WGPNBC Déclaration d’IC pour le modèle DX-WGPDTCInstalación del software y el hardware ContenidoIntroducción ContenidoInstalación del software y el hardware Repita los pasos 10 al 12 para agregar el protocolo IPX/SPXDesinstalar el software y el hardware Configuración de la red inalámbricaConfiguración de la red inalámbrica La ficha Link Information Información del EnlaceConexión a una red Ficha Available Networks Redes DisponiblesQue use el mismo Ssid Para conectarse a una redAjuste los valores de los siguientes campos Haga clic en Complete Completar. Ha terminadoFicha About Acerca de Localización y Corrección de FallasFicha de Ajustes de Perfil Localización y Corrección de FallasAvisos legales Avisos legalesAvisos legales Avisos legales
Top Page Image Contents