Cabletron Systems 9T101-04 manual Introduction, Features

Page 9

Chapter 1

Introduction

The 9T101-04 Token Ring Router module, shown in Figure 1-1,is a four port Token Ring router. Up to four front panel network connections can be made to this module and they can be routed to any other port and to any other MMAC-Plus module via the FNB bus.

Features

Processor

The 9T101-04 is equipped with an advanced IDT R4600 Fourth Generation 64 bit RISC microprocessor. This microprocessor provides a platform for all management functions within a scalable RISC-based architecture.

System Management

The 9T101-04 provides an interface to the System Management Bus (SMB-1) for intermodule management.

Connectivity

The 9T101-04 provides four front panel DB-15 Token Ring ports.

Routing

The 9T101-04 provides Routing between the front panel ports and/or to any other module in the chassis via FNB -1 or FNB -2 of the FNB bus. IEEE 802.1d Spanning Tree Protocol is supported in all bridging functions.

1-1

Image 9
Contents MMAC-Plus9T101-04 Four Port Token Ring Router User’s Guide Page Page Vcci Notice FCC NoticeDOC Notice Page Contents Contents Introduction FeaturesManagement Information Base MIB Support Features Getting Help Related ManualsInstalling the MMAC-Plus Module Installing the MMAC-Plus Module Local Management Console Reset SwitchMenu Function Selection Local Management Console Installing the MMAC-Plus Module Operation T101-04 Block DiagramFlexible Network Bus FNB System Diagnostic ControllerSystem Management Buses DC/DC ConverterCPU FNB InterfaceOperation Lanview LEDs Lanview LEDsLED Color State Description Green Mbps Off Lanview LEDs Safety ServiceSpecifications Environment Physical