Device VLAN Configuration Screen
4.Press ENTER. The message “SAVED OK” displays.
NOTE |
The default VLAN cannot be disabled.
3.4.7Changing the Forwarding Mode
To change the forwarding mode of the switch, proceed as follows:
1.Use the arrow keys to highlight the Forward Default VLAN Out All Ports field.
2.Press the SPACE bar or BACKSPACE to toggle between YES and NO. The YES selection places the default VLAN (VLAN ID=1) in the Port VLAN Lists of all ports on the switch. The NO selection removes the default VLAN from the Port VLAN Lists of all ports, unless those ports have a PVID of 1 (those belonging to only the Default VLAN).
3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4.Press ENTER. The message “SAVED OK” displays.
3.4.8Paging Through the VLAN List
To display additional VLANs that do not display in the current VLAN List as shown on the screen, use the NEXT or PREVIOUS commands located at the bottom of the screen, as follows:
NOTE |
The NEXT and PREVIOUS fields will only display if there are further VLAN List entries to page through.
1.To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the entries on the next screen.
2.To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to view the entries on the previous screen.
802.1Q VLAN User’s Guide |