
Chapter 3: VLAN Configuration
3.Use the arrow keys to highlight the VLAN ID field. Assign a number to a new VLAN by typing the number “2” in the VLAN ID field.
4.Use the arrow keys to highlight the FID field. In this example we will assign the new VLAN to FID 2 by typing the number “2” in the FID field.
5.Use the arrow keys to highlight the VLAN Name field. Type “TEST VLAN” in the VLAN Name field. Press ENTER.
6.Use the arrow keys to highlight the ADD/DEL field.
7.Press the SPACE bar to toggle the field to ADD. Press ENTER. The VLAN is added to the list.
8.Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER. The message “SAVED OK” displays. The screen refreshes and VLAN 2, the TEST VLAN has been added to the Device VLAN Configuration screen and all learning of MAC addresses will be updated in FID 2. The screen should now look like Figure
NOTE |
This new VLAN is currently disabled, as the DISABLED field to the far right shows. When all the rules and settings for the VLAN are in place, it will be necessary to return to this screen and enable the VLAN.
802.1Q VLAN User’s Guide |