Cabletron Systems SEHI100TX-22 manual Connecting to an EPIM-100TX, Sehi Network Ports

Page 38

Chapter 5: Connecting to the Network

16X

5X

15X

4X

14X

3X

13X

2X

12X

1X

LNK

EPIM-100TX

EPIM

1

 

1511_10

Figure 5-1 SEHI Network Ports

3.Check that the applicable LNK LED for the port is on. If the LED is off, perform each of the following steps until it is on:

a.Check that the 100BASE-TX device at the other end of the twisted pair segment is powered up.

b.Verify that the RJ45 connector on the twisted pair segment has the proper pinouts.

c.Check the cable for continuity.

d.Check that the twisted pair connection meets the cable specifications outlined in Section 3.1.2.

If a link is not established, contact Cabletron Systems Technical Support.

5.1.2Connecting to an EPIM-100TX

The EPIM-100TX is often used to provide a connection between the SEHI and a bridge, router, or switch. Normally, in this configuration, a “straight-through” cable is used and the EPIM crossover switch shown in Figure 5-2 is set to “not crossed over.”

The EPIM-100TX is also used to provide another RJ45 port to connect to a UTP segment. Before connecting a segment to the EPIM-100TX, check each end of the segment to determine if the wires have been crossed over for the proper connection. If the wires do not cross over, use the switch on the EPIM-100TX to internally cross over the RJ45 port. Refer to Figure 5-2 to properly set the EPIM-100TX crossover switch.

5-2

SEHI100TX User’s Guide

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Intelligent Stackable HUB USER’S Guide Page SEHI100TX User’s Guide DOC Notice Cabletron Software Program License Declaration of Conformity Contents Contents SEHI100TX User’s Guide Vii Contents Viii SEHI100TX User’s Guide Using this Manual Chapter IntroductionDocument Conventions Following conventions are used throughout this documentGetting Help Your email addressRelated Manuals Chapter Sehi Features and Options Sehi OverviewSehi Features Sehi Features and OptionsStackable Capabilities Optional Epims Rack Mounting CapabilitiesRemote Network Management HubSTACK Interconnect Cable Requirements Chapter Installation Requirements SpecificationsCable Specifications UTP Cable Specifications Multimode Fiber Optic Cable Specifications Network Cable Lengths Network Cable Lengths Network Port Specifications COM Port RequirementsEnvironmental Requirements Operating SpecificationsPower Supply Requirements Agency ApprovalsPhysical Specifications Chapter Installation Unpacking the SehiPRE-INSTALLATION Checkout Nvram Switch LocationTabletop or Shelf Installation Rackmount InstallationAttaching the Strain-Relief Bracket Rackmount Installation Adequate clearance two inches on either side Powering UP and Stacking the Sehi Repeat steps 3 through 6 until all SEH hubs are connected Installing AN Epim Installing an EpimSEHI100TX User’s Guide Connecting to Network Ports Chapter Connecting to the NetworkConnecting the Sehi to the Network Connecting to an EPIM-100TX Sehi Network PortsRX+ TX+ Position = Not crossed over Connecting to an EPIM-100FX or EPIM-100FMB EPIM-100FX or EPIM-100FMB PortTesting the Installation SEHI100TX User’s Guide Chapter Troubleshooting Installation TestUsing Lanview Using Lanview Using the Reset Button Epim 1 RCV LEDSetting the Nvram Switch SEHI100TX User’s Guide Chapter Local Management Keyboard Conventions Keyboard Conventions FunctionManagement Terminal Setup Console Cable Configuration Management Terminal Setup Parameters Accessing Local Management Sehi Local ManagementAccessing Local Management Feature Selection Screen Feature Selection ScreenCommunity Name Table Screen Community Name Table ScreenManagement fields, excluding IP Address Editing the Community Name Field Configuration Screen ConfigurationSetting the IP Address Setting the Subnet Mask Exiting the Configuration Screen Setting the Default GatewayUsing the Port Enable Override Trap Table Screen Trap Table Screen1 Configuring the Trap Table Exiting the Trap Table Screen Snmp Tools ScreenFollowing sections describe Snmp Tools screen fields Getting Individual OIDs Setting an OID Getting the Next OIDViewing Multiple OIDs Walking Through OIDsRepeating the Last OID Stepping Through OIDsCycling Through OIDs Exiting the Snmp Tools ScreenDevice Statistics Screen Device Statistics ScreenDisplays the number of errors received This command lets the user enable the selected port Selecting the Appropriate Module/Port Using the Enable Port CommandUsing the Disable Port Command Setting the UPDATE-FREQency Field Exiting the Device Statistics ScreenEPIM-100TX Appendix a Epim SpecificationsEpim Specifications EPIM-100FX EPIM-100FMB Figure A-3 EPIM-100FMBSEHI100TX User’s Guide Appendix B Image File Download Using OID Strings Setting Unix Workstation AS Tftp Server Standard Local Download Table B-1 OIDs and Settings Index NumericsIndex-2 SEHI100TX User’s Guide Power Supply Cord
Related manuals
Manual 58 pages 17.82 Kb

SEHI100TX-22 specifications

Cabletron Systems SEHI100TX-22 is a high-performance network interface card that has been designed for reliable data transfer in various networking environments. Ideal for both enterprise and small business applications, the SEHI100TX-22 delivers exceptional performance at a competitive price point.

One of the standout features of the SEHI100TX-22 is its support for 100Base-TX Ethernet standards, which enables high-speed data transmission at rates of up to 100 Mbps. This high throughput capacity makes it an excellent choice for organizations that require swift and efficient data handling, particularly in environments with heavy network traffic.

The card is equipped with two RJ-45 connectors, allowing it to support dual-port configurations. This dual-port setup enhances networking capabilities by enabling fault tolerance and load balancing, ensuring that the network remains operational even in the event of a failure. Moreover, it supports full-duplex operation, allowing for simultaneous bi-directional data transmission, further improving overall network efficiency and performance.

Another significant advantage of the SEHI100TX-22 is its compatibility with a wide range of operating systems and platforms, including Windows, Linux, and various UNIX variants. This versatility ensures that it can be seamlessly integrated into existing network infrastructures without the need for extensive configuration or modification.

In terms of installation and maintenance, the SEHI100TX-22 is user-friendly, thanks to its Plug and Play capability. This feature allows for easy installation; users can simply insert the card into an available PCI slot, and the operating system will automatically recognize and configure the device, minimizing downtime and simplifying the setup process.

Additionally, the SEHI100TX-22 incorporates advanced technologies like Auto-Negotiation, which automatically detects the speed and duplex capabilities of the connected device, thus optimizing the network performance. The card also features various onboard diagnostic LEDs, providing real-time feedback on connection status and data activity, which aids in troubleshooting and performance monitoring.

In summary, the Cabletron Systems SEHI100TX-22 offers a robust set of features that cater to the demands of modern network environments. With its high-speed capabilities, dual-port support, compatibility across multiple operating systems, and user-friendly installation process, it remains a solid choice for organizations looking to enhance their networking performance and reliability.
Top Page Image Contents