Cabletron Systems SEHI-22FL manual Community Name Table Screen

Chapter 7: Local Management

7.5THE COMMUNITY NAME TABLE SCREEN

To access the Community Name Table screen from the Feature Selection screen, use the arrow keys to highlight the Community Name Table option, then press ENTER or F6. The Community Name Table screen shown in Figure 7-4 appears.

SEHI LOCAL MANAGEMENT

Cabletron SEHI Revision X.XX.XX

COMMUNITY NAME TABLE

	COMMUNITY NAME		ACCESS
	PUBLIC		BASIC-READ
	PUBLIC		READ-ONLY
	PUBLIC		READ-WRITE
	PUBLIC		SUPER-USER
SAVE	IP TABLE	TRAP TABLE	SNMP TOOLS	RETURN
F6	F7	F8	F9
				1490_23

Figure 7-4 Community Name Table Screen

Community names are set through the Community Name Table option. Community names are passwords to Local Management and are agents of security control to the SEHI. SEHI access is controlled by establishing up to four different levels of security authorization: Basic-Read, Read-Only, Read-Write, and Super-User.

With Super-User access, the user changes the existing passwords by changing the community names. Only the community name assigned Super-User access has full management privileges.

The following sections explain each field on the Community Name Table screen and provides instructions on how to change them.

COMMUNITY NAME

Displays the user-defined name through which a user can access Local Management for the SEHI. Any community name assigned here acts as a password to Local Management.

7-8 SEHI User’s Guide