Cabletron Systems 12 manual Installing the 9E428 and 9E429 Modules, Unpacking the Module

Page 15

Chapter 2

Installing the 9E428 and 9E429 Modules

The 9E428-12 and the 9E429-12 modules occupy a single slot in the SmartSwitch 9000 chassis. The 9E428-36 and the 9E429-36 occupy two slots in the chassis.

NOTE

The INB Terminator Modules must be installed on the rear of the chassis before powering up this module. Refer to the INB Terminator Modules Installation Guide for information and installation procedure.

Install the modules by following the steps starting below.

Unpacking the Module

1.Carefully remove the module from the shipping box. (Save the box and packing materials in the event the module must be reshipped.)

2.Remove the module from the plastic bag. Observe all precautions to prevent damage from Electrostatic Discharge (ESD).

3.Carefully examine the module, checking for damage. If any damage exists, DO NOT install the module. Contact Cabletron Systems Technical Support immediately.

2-1

Image 15

Contents SmartSwitch 9E428-12/36 and 9E429-12/36 User’s Guide Page Page Vcci Notice FCC NoticeDOC Notice Declaration of Conformity Addendum Contents Speciﬁcations ChapterIntroduction Features INB 9E428-12/36 and 9E429-12/36 Modules Getting Help Related ManualsIntroduction Unpacking the Module Installing the 9E428 and 9E429 ModulesUser Accessible Components User Accessible Components3 4 5 6 7 Setting the Module DIP SwitchSee the Cautions at the end of this table Installing the Module in the SmartSwitch 9000 Chassis Installing the Module Reset Switch Reset SwitchInstalling the 9E428 and 9E429 Modules Operation Enib I960 Core SmartSwitch AsicSMB-10 Bus System Diagnostic ControllerSystem Management Buses SMB-1 BusDC/DC Converter INB InterfaceItdm Arbitration levels Monarch/Slave SmartSwitch 9000 Modules Lanview LEDs Functions of the INB Receive LEDs are listed in Table Functions of the Port Transmit LEDs are listed in Table Lanview LEDs Network Interfaces Technical SpeciﬁcationsMemory StandardsWeight SafetyService DimensionsEnvironment Speciﬁcations

12 specifications

Cabletron Systems 12, widely regarded for its impact on networking technology in the late '80s and early '90s, has become a pivotal part of the history of data communications. This product marked a significant leap forward in the area of local area networking (LAN), blending reliability with advanced capabilities tailored for varied business needs.

One of the standout features of Cabletron Systems 12 is its ability to facilitate scalable networking solutions. It was designed with modularity in mind, allowing businesses to expand their network infrastructure as their needs evolved. This characteristic made it particularly appealing to organizations experiencing rapid growth, as it provided a cost-effective way to upgrade and add components without a complete system overhaul.

The architecture of Cabletron Systems 12 was based on a multi-layer switching technology. This approach enhanced the speed and efficiency of data transmission across the network. By employing a combination of hardware and software solutions, it minimized bottlenecks and ensured superior performance during high-traffic periods. Enhanced throughput made it suitable for a range of applications, from small businesses to enterprise-level networks.

Another significant feature was its support for a diverse set of network protocols, including Ethernet and Token Ring. This flexibility allowed organizations to integrate various networking technologies into a single cohesive system, thereby protecting their investment in existing infrastructure while still enabling new technology adoption.

The design of Cabletron Systems 12 also prioritized management and monitoring capabilities. With user-friendly interfaces and tools, network administrators could easily configure and manage their networks, enhancing overall operational efficiency. Real-time diagnostics and reporting features helped in troubleshooting and maintaining optimum network performance.

In addition to its performance-oriented features, Cabletron Systems 12 was also noted for its robust security protocols, which were crucial in an era where cyber threats were beginning to rise. Comprehensive security measures ensured that data integrity and privacy were maintained, providing peace of mind for organizations relying on digital communications.

Overall, Cabletron Systems 12 encapsulated the technological innovations of its time, offering a blend of speed, scalability, and security. Its ability to adapt to the changing landscape of networking set a precedent for future developments in the field, making it a noteworthy milestone in the evolution of communication technology.