Cabletron Systems 12 manual Introduction

Page 9

Chapter 1

Introduction

The 9E428-12/36 and 9E429-12/36 (Figure 1-1)are switching modules that provide either 12 or 36 ports, depending on the module. The 9E428-12/36 provide Ethernet fiber-optic 10Base-FL connectivity via multimode ST (straight through) connectors, while the 9E429-12/36 modules use single mode ST connectors. There are two ST connectors for each port, one for transmit and one for receive. Each module also provides an additional port that connects directly to the Internal Network Bus (INB) backplane interface. These modules use a SmartSwitch ASIC design and an advanced Intel i960® microprocessor. This microprocessor provides a platform for all management functions within a scalable RISC-Based Architecture.

These modules can operate in two modes: either as a 12/36 port Ethernet traditional switch (using 802.1d standards) with a high speed backbone connection, or as a Secure Fast Switch (SFS) with 12/36 Ethernet connections. Each port can be configured to operate in the Full Duplex mode. This configuration allows each port to provide a full 20 Mbps of bandwidth for file servers or high-end, user-intensive work stations.

Network management information is available through a variety of methods. All information based on Simple Network Management Protocol (SNMP) is accessible either via an in-band (front panel port), Side Band (SMB-10), or via the Environmental Module’s COM ports. Serial Line Internet Protocol (SLIP) or Point-to-Point Protocol (PPP) is supported by the Environmental Module’s COM ports. For more information on the SMB-10, SLIP or PPP, refer to the SmartSwitch 9000 Local Management User’s Guide.

The 9E428-12/36 and 9E429-12/36 also feature front panel LANVIEW™ Diagnostic LED’s to offer at-a-glance status information about each front panel port, as well as the operation of the overall module.

1-1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SmartSwitch 9E428-12/36 and 9E429-12/36 User’s Guide Page Page Vcci Notice FCC NoticeDOC Notice Declaration of Conformity Addendum Contents Specifications ChapterIntroduction Features INB 9E428-12/36 and 9E429-12/36 Modules Getting Help Related ManualsIntroduction Unpacking the Module Installing the 9E428 and 9E429 ModulesUser Accessible Components User Accessible Components3 4 5 6 7 Setting the Module DIP SwitchSee the Cautions at the end of this table Installing the Module in the SmartSwitch 9000 Chassis Installing the Module Reset Switch Reset SwitchInstalling the 9E428 and 9E429 Modules Operation Enib I960 Core SmartSwitch AsicSystem Management Buses System Diagnostic ControllerSMB-1 Bus SMB-10 BusDC/DC Converter INB InterfaceItdm Arbitration levels Monarch/Slave SmartSwitch 9000 Modules Lanview LEDs Functions of the INB Receive LEDs are listed in Table Functions of the Port Transmit LEDs are listed in Table Lanview LEDs Memory Technical SpecificationsStandards Network InterfacesService SafetyDimensions WeightEnvironment Specifications

12 specifications

Cabletron Systems 12, widely regarded for its impact on networking technology in the late '80s and early '90s, has become a pivotal part of the history of data communications. This product marked a significant leap forward in the area of local area networking (LAN), blending reliability with advanced capabilities tailored for varied business needs.

One of the standout features of Cabletron Systems 12 is its ability to facilitate scalable networking solutions. It was designed with modularity in mind, allowing businesses to expand their network infrastructure as their needs evolved. This characteristic made it particularly appealing to organizations experiencing rapid growth, as it provided a cost-effective way to upgrade and add components without a complete system overhaul.

The architecture of Cabletron Systems 12 was based on a multi-layer switching technology. This approach enhanced the speed and efficiency of data transmission across the network. By employing a combination of hardware and software solutions, it minimized bottlenecks and ensured superior performance during high-traffic periods. Enhanced throughput made it suitable for a range of applications, from small businesses to enterprise-level networks.

Another significant feature was its support for a diverse set of network protocols, including Ethernet and Token Ring. This flexibility allowed organizations to integrate various networking technologies into a single cohesive system, thereby protecting their investment in existing infrastructure while still enabling new technology adoption.

The design of Cabletron Systems 12 also prioritized management and monitoring capabilities. With user-friendly interfaces and tools, network administrators could easily configure and manage their networks, enhancing overall operational efficiency. Real-time diagnostics and reporting features helped in troubleshooting and maintaining optimum network performance.

In addition to its performance-oriented features, Cabletron Systems 12 was also noted for its robust security protocols, which were crucial in an era where cyber threats were beginning to rise. Comprehensive security measures ensured that data integrity and privacy were maintained, providing peace of mind for organizations relying on digital communications.

Overall, Cabletron Systems 12 encapsulated the technological innovations of its time, offering a blend of speed, scalability, and security. Its ability to adapt to the changing landscape of networking set a precedent for future developments in the field, making it a noteworthy milestone in the evolution of communication technology.
Top Page Image Contents