Cabletron Systems 6000 manual Refer to the Local Management User’s Guide for setup

Page 45

 

 

 

Troubleshooting Checklist

 

 

 

 

 

Table 4-4 Firmware Troubleshooting

 

 

 

 

 

Possible Cause

Instruction

 

 

 

 

 

 

Autobaud enabled.

Press ENTER (RETURN) (may take up to four times).

 

 

 

 

 

Terminal setup is not correct.

Refer to the Local Management User’s Guide for setup

 

 

procedures.

 

 

 

 

 

Improper console cable

Refer to Appendix A for proper console port pinouts.

 

pinouts.

 

 

 

 

 

 

 

 

 

The COM port of the device

1.

Establish a Telnet connection to the device.

 

has been disabled, or the

2.

Refer to the Local Management User’s Guide on

 

COM port application has

 

 

enabling/disabling the COM port and changing the COM

 

been changed.

 

 

 

port application.

 

 

 

 

 

 

 

 

 

Corrupt firmware image, or

1.

If possible, attempt to download the image to the device

 

hardware fault.

 

again. Refer to Section B.1 for instructions on how to force

 

 

 

a download of a new firmware image.

 

 

2.

Contact Cabletron Systems if the problem continues.

 

 

 

 

 

Troubleshooting 4-7

Page 44 Page 46
Image 45
Page 44 Page 46
Contents SmartSwitch Interface Module User’s Guide Page Page FCC Notice Industry Canada NoticeVcci Notice Iii Cabletron SYSTEMS, INC Program License AgreementPage Page Page Vii Cabletron Systems Limited Program License AgreementViii Class 1 Laser Transceivers Declaration of Conformity Contents Network Requirements Figures Tables About This Guide Using this GuideStructure of this Guide Related Documents Document Conventions Overview Introduction6E233-49 SmartSwitch Connectivity Full Duplex Switched Ethernet Port/VLAN Redirect Functions Garp Switch Operation Distributed Chassis Management Your email address Getting Help10BASE-T Network Network RequirementsPage Installation Unpacking the 6E233-49 SmartswitchRequired Tools Installing the 6E233-49 Smartswitch Into the 6C105 Chassis Installing OptionsInstalling the 6E233-49 SmartSwitch into the 6C105 Chassis Installing an Interface Module Connecting to the Network Straight Cable Connection Connection Using the RJ21 Angle Adapter Completing the Installation Using Lanview TroubleshootingLanview LEDs CPU Refer to the Local Management Troubleshooting Checklist Power System Troubleshooting Refer to the Local Management User’s Guide for setup Refer to the Local Management User’s Guide for Local Management User’s Guide for instructions on Reset Button Using the Reset ButtonModule Specifications SpecificationsPhysical Properties Environmental RequirementsINPUT/OUTPUT Ports COM Port Pinout AssignmentsRegulatory Compliance Optional Installations Mode Switch Bank Settings Setting the Mode SwitchesRequired Tools Setting the Mode Switches Figure B-2shows the location of the Dram Simm connector Simm UpgradeInstalling the Dram Simm Figure B-4 Hsim Connector Location Installing Optional High Speed Interface ModulesPage Numerics IndexIndex-2

6000 specifications

Cabletron Systems 6000 is a high-performance networking device that has made significant contributions to the evolution of enterprise networking solutions. Designed primarily for medium to large organizations, this device emphasizes scalability, flexibility, and robust performance.

One of the central features of the Cabletron Systems 6000 is its modular architecture, allowing businesses to customize their network configurations according to their specific requirements. This modularity means that organizations can start with a basic setup and expand their networking capabilities over time by adding additional modules, thereby optimizing their investment.

At the heart of the Cabletron 6000, various technologies come together to deliver superior network performance. It leverages advanced Ethernet and Fast Ethernet technologies, with support for both 10Base-T and 100Base-TX standards. This ensures compatibility with a wide array of networking devices while providing the necessary bandwidth to handle increasing data traffic demands.

Another noteworthy characteristic of the Cabletron Systems 6000 is its robust management capabilities. The device supports SNMP (Simple Network Management Protocol), which enables administrators to monitor network devices in real-time, manage performance, and troubleshoot issues proactively. This feature enhances network reliability and minimizes downtime, critical components for businesses that depend heavily on seamless communication.

The device also incorporates advanced security features, including VLAN (Virtual Local Area Network) support, which allows for segmenting network traffic for enhanced security and performance. This segmentation ensures that sensitive information remains contained and reduces the risk of unauthorized access, making it an ideal choice for businesses that prioritize data security.

Furthermore, the Cabletron Systems 6000 is designed to be user-friendly, featuring an intuitive interface for configuration and management tasks. This ease of use reduces the training burden on IT staff and allows for quicker deployment and troubleshooting.

In summary, the Cabletron Systems 6000 stands out with its modular design, advanced technologies, and robust management and security features. These characteristics make it a versatile and dependable choice for businesses looking to establish or enhance their networking infrastructure, adapting seamlessly to changing demands over time.
Top Page Image Contents