Cabletron Systems 6000 manual Using the Reset Button

Page 48

Using the RESET Button

4.3USING THE RESET BUTTON

The RESET button, located near the upper plastic locking tab of the module (refer to Figure 4-2), resets the 6E233-49 SmartSwitch processor without affecting the NVRAM.

Pressing the RESET button resets the device, and all current switching being

!performed by the module is halted. A module downtime of up to two minutes

CAUTION

results from this action.

RESET Button

ETHERNET

6E233-49

RESET

COM

CPU

1236

26931_10

Figure 4-2 RESET Button

To reset the 6E233-49 SmartSwitch processor, press and release the RESET button. The module processor goes through a reset process of approximately 20 seconds. Additional downtime may be added as the module reenters the network.

NOTE

It is not recommended to press the RESET button while the module is already in reset mode. The module will enter an extended diagnostic procedure, which is unnecessary for normal operation. This procedure will take much longer than a minute. The ESC key can be used to exit the procedure.

4-10Troubleshooting

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SmartSwitch Interface Module User’s Guide Page Page FCC Notice Industry Canada NoticeVcci Notice Cabletron SYSTEMS, INC Program License Agreement IiiPage Page Page Cabletron Systems Limited Program License Agreement ViiViii Class 1 Laser Transceivers Declaration of Conformity Contents Network Requirements Figures Tables Using this Guide About This GuideStructure of this Guide Related Documents Document Conventions Introduction Overview6E233-49 SmartSwitch Connectivity Full Duplex Switched Ethernet Port/VLAN Redirect Functions Garp Switch Operation Distributed Chassis Management Getting Help Your email addressNetwork Requirements 10BASE-T NetworkPage Installation Unpacking the 6E233-49 SmartswitchRequired Tools Installing Options Installing the 6E233-49 Smartswitch Into the 6C105 ChassisInstalling the 6E233-49 SmartSwitch into the 6C105 Chassis Installing an Interface Module Connecting to the Network Straight Cable Connection Connection Using the RJ21 Angle Adapter Completing the Installation Troubleshooting Using LanviewLanview LEDs CPU Refer to the Local Management Troubleshooting Checklist Power System Troubleshooting Refer to the Local Management User’s Guide for setup Refer to the Local Management User’s Guide for Local Management User’s Guide for instructions on Using the Reset Button Reset ButtonSpecifications Module SpecificationsPhysical Properties Environmental RequirementsINPUT/OUTPUT Ports COM Port Pinout AssignmentsRegulatory Compliance Optional Installations Mode Switch Bank Settings Setting the Mode SwitchesRequired Tools Setting the Mode Switches Simm Upgrade Figure B-2shows the location of the Dram Simm connectorInstalling the Dram Simm Installing Optional High Speed Interface Modules Figure B-4 Hsim Connector LocationPage Index NumericsIndex-2

6000 specifications

Cabletron Systems 6000 is a high-performance networking device that has made significant contributions to the evolution of enterprise networking solutions. Designed primarily for medium to large organizations, this device emphasizes scalability, flexibility, and robust performance.

One of the central features of the Cabletron Systems 6000 is its modular architecture, allowing businesses to customize their network configurations according to their specific requirements. This modularity means that organizations can start with a basic setup and expand their networking capabilities over time by adding additional modules, thereby optimizing their investment.

At the heart of the Cabletron 6000, various technologies come together to deliver superior network performance. It leverages advanced Ethernet and Fast Ethernet technologies, with support for both 10Base-T and 100Base-TX standards. This ensures compatibility with a wide array of networking devices while providing the necessary bandwidth to handle increasing data traffic demands.

Another noteworthy characteristic of the Cabletron Systems 6000 is its robust management capabilities. The device supports SNMP (Simple Network Management Protocol), which enables administrators to monitor network devices in real-time, manage performance, and troubleshoot issues proactively. This feature enhances network reliability and minimizes downtime, critical components for businesses that depend heavily on seamless communication.

The device also incorporates advanced security features, including VLAN (Virtual Local Area Network) support, which allows for segmenting network traffic for enhanced security and performance. This segmentation ensures that sensitive information remains contained and reduces the risk of unauthorized access, making it an ideal choice for businesses that prioritize data security.

Furthermore, the Cabletron Systems 6000 is designed to be user-friendly, featuring an intuitive interface for configuration and management tasks. This ease of use reduces the training burden on IT staff and allows for quicker deployment and troubleshooting.

In summary, the Cabletron Systems 6000 stands out with its modular design, advanced technologies, and robust management and security features. These characteristics make it a versatile and dependable choice for businesses looking to establish or enhance their networking infrastructure, adapting seamlessly to changing demands over time.
Top Page Image Contents