Cabletron Systems 9E132-15, 9E138-12 System Diagnostic Controller, DC/DC Converter, FNB Interface

Page 23

Operation

System Diagnostic Controller

This diagnostic controller is composed of a Z-80 microprocessor and its supporting logic. The diagnostic controller is designed to control the power-up sequencing of modules, monitor the Ethernet MicroLan Switch Modules input and output power parameters, keep watch over the main host processor, as well as monitor the temperature and control the SMB LANVIEW diagnostic LED. Although the diagnostic controller and the main host processor can operate independently of each other if needed, they exchange information about each other’s status and overall module condition. The information gathered by the diagnostic controller is available to the network manager via local/remote management and the LCD located on the Environmental Module. The Ethernet MicroLan Switch Modules have been designed so that in the event of a diagnostic controller fault, the modules will continue to function.

DC/DC Converter

The DC/DC converter converts the 48 VDC on the system power bus to the necessary operating voltages for its host network services module. The diagnostic controller controls the operation of the DC/DC converter.

FNB Interface

SmartSwitch 9000 modules are designed with one of two attachment policies. One allows dual attachment of a module to either FNB-1 or FNB-2; the second allows dual attachment to both FNB-1 and FNB-2. The Ethernet MicroLan Switch Modules have one dual attachment to the FNB backplane, connecting to either FNB-1 or FNB-2. The module can insert into the FNB or bypass it. These flexible configuration options make the SmartSwitch 9000 ideal for networks designed to Bridge/Route multiple lower speed LANs to FDDI and/or networks designed using an FDDI collapsed backbone.

3-3

Image 23
Contents 9031173-02 Page Page DOC Notice FCC NoticeVcci Notice Declaration of Conformity Addendum Page Contents Appendix a EPIMs Introduction FeaturesIetf Fddi MIB Ietf MIB Ethernet MicroLan Switch Modules Getting Help Related ManualsInstalling the Modules Installing the Modules Epim Revisions Installing EPIMsInstalling an Epim Installing the EpimReset Switch Reset SwitchUser-Accessible Components User-Accessible ComponentsLocation of Module DIP Switch Setting the Module Card DIP SwitchSee the Cautions at the end of this table Operation Ethernet MicroLan Switch Modules Block DiagramSMB-10 Bus Flexible Network Bus FNBSystem Management Buses SMB-1 BusFNB Interface System Diagnostic ControllerDC/DC Converter I960 Core Lanview LEDs Lanview LEDsFunction of the FNB Receive LED is listed in Table Function of the Link LEDs is listed in Table Lanview LEDs Specifications SafetyService Environment DimensionsWeight PhysicalEPIM-T EPIMsFigure A-1. EPIM-T Pinouts EPIM-F1 and EPIM-F2EPIM-F3 Parameter Typical Minimum Maximum Grounding Connector TypeEPIM-A and EPIM-X AUI Port Table A-4 lists the DB-15pinouts

9E132-15, 9E138-36b, 9E138-12, 9E133-36 specifications

Cabletron Systems was a pioneering company in the field of networking technologies during the 1980s and 1990s. Their products, including the Cabletron Systems 9E133-36, 9E138-12, 9E138-36b, and 9E132-15, are notable for their advanced features and innovative designs that catered to the evolving needs of network communications.

The Cabletron 9E133-36 is a versatile network interface card that supports various protocols and speeds, allowing for seamless integration into existing networks. Its main feature is support for Ethernet and token ring LANs, making it an adaptable solution for organizations with diverse networking requirements. The card's modular design allows easy upgrades, ensuring longevity in a rapidly changing technology landscape.

On the other hand, the Cabletron 9E138-12 is characterized by its robust performance in a compact form factor. It is designed for environments that require high efficiency and reliability. One standout characteristic is its ability to handle multiple data types across a single platform, which is essential for businesses that utilize various applications simultaneously. With a strong emphasis on fault tolerance, the device enhances network resilience, making it a reliable choice for critical communication setups.

The Cabletron 9E138-36b takes performance to the next level, offering enhanced processing capabilities and increased throughput. It incorporates advanced packet-switching technology, allowing for rapid data transfer and optimized network traffic management. The 9E138-36b is especially suited for organizations demanding high bandwidth for their operations, such as multimedia applications and large-scale data transfers.

Lastly, the Cabletron 9E132-15 is a significant product focusing on network monitoring and management. This device comes equipped with features that facilitate comprehensive traffic analysis and performance metrics tracking. Its ability to integrate with network management tools distinguishes it from other offerings, allowing IT departments to maintain optimal network performance and quickly identify potential bottlenecks.

Overall, the Cabletron Systems 9E product line showcases a commitment to innovation and quality in networking technology. Their emphasis on modularity, multi-protocol support, and management capabilities has left a lasting impact on how organizations build and maintain their networks, adapting to the ever-evolving landscape of digital communication.