Citrix Systems CITRIX NETSCALER 9.3 Parameters for configuring a user group, GroupName Group Name

Chapter 1 Authentication and Authorization

wunbind system group <groupName> -userName <userName>

wshow system group <groupName>

Parameters for configuring a user group

groupName (Group Name)

A name for the group you are creating. The name can begin with a letter, number, or the underscore symbol, and can consist of from 1 to 31 letters, numbers, and the hyphen (-), period (.), pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) symbols. (Cannot be changed for existing groups.)

userName

The name that was assigned to a previously configured user.

promptString (CLI Prompt)

A name for the NetScaler command-line prompt for all the users that are part of this group. The name can consist of letters, numbers, the hyphen (-), period (.), pound (#), space ( ), at sign (@), equals (=), colon (:), underscore (_) symbols, and the following variables:

w%u—Is replaced by the user name.

w%h—Is replaced by the host name of the NetScaler appliance.

w%t—Is replaced by the current time in 12-hour format.

w%T—Is replaced by the current time in 24-hour format.

w%d—Is replaced by the current date.

w%s—Is replaced by the state of the NetScaler appliance.

A maximum of 63 characters are allowed for this parameter. A variable (for example, %u) is counted as two characters. The resulting prompt can be longer than 63 characters.

timeout (CLI Idle Session Timeout (Secs))

Time-out value, in seconds, for inactive CLI sessions for all the users that are part of this group. If a user's CLI session is idle for a time that exceeds the time-out value, the NetScaler appliance terminates the connection.

To configure a user group by using the configuration utility

1.In the navigation pane, expand System, and then click Groups.

2.In the details pane, do one of the following:

•To create a new user group, click Add.

•To modify an existing user group, select the group, and then click Open.

3.In the Create System Group or Configure System Group dialog box, set the following parameters:

26