Citrix Systems CITRIX NETSCALER 9.3 manual Nslog Server Command Options, Audserver -remove

Chapter 3 Audit Logging

To uninstall the NSLOG server on a Windows operating system

At a command prompt, run the following from the <root directory extracted from Windows NSLOG server package zip file>\bin path:

audserver -remove

NSLOG Server Command Options

The following table describes the commands that you can use to configure audit server options.

Table 3-2.Audit Server Options

Audit server commands	Specifies
audserver -help	The available Audit Server options.
audserver -addns -f <path to	The system that gathers the log
configuration file>	transaction data.
	You are prompted to enter the IP address
	of the NetScaler appliance.
	Enter the valid user name and password.
audserver -verify -f <path to	Check for syntax or semantic errors in
configuration file>	the configuration file (for example,
	auditlog.conf).
audserver -start -f <path to	Start audit server logging based on the
configuration file>	settings in the configuration file
	(auditlog.conf ).
	Linux only: To start the audit server as a
	background process, type the ampersand
	sign (&) at the end of the command.
audserver -stop	Stops audit server logging when audit
(Linux only)	server is started as a background
	process. Alternatively, use the Ctrl+C key
	to stop audit server logging.
audserver -install -f <path to	Installs the audit server logging client as
configuration file>	a service on Windows.
(Windows only)

86