1.7.3 HDM3D-C5SW-R
1. | IR INPUT: Plug in IR receiver. | 2. | +5V DC: Spare power jack for over 60m |
|
|
| transmission when the RX may need external |
|
|
| power to work. |
|
|
|
|
3. | HDMI SIGNAL: Plug in the CAT5 connected to the | 4. | IR SIGNAL: Plug in the CAT5 connected to the |
| respective A/V SIGNAL port on the |
| respective CHANNEL CONTROL port on the |
|
| ||
|
|
|
|
5. | INPUT : Display the current showing HDMI source | 6. | INPUT SELECT: Push button for switching input |
| channel |
| source channel in sequential order |
|
|
|
|
7. | EQ Level: Adjust the | 8. | HDMI OUT: Connect to HDTV with a HDMI cable |
| to the received HDMI signals. The HDMI signal |
|
|
| level varies from 0 (strongest) to 7 (weakest) for |
|
|
| respective transmission length from longest |
|
|
| possible range to short distance. Please adjust the |
|
|
| signal level from 7 to 0 and stop turning the |
|
|
| rotary switch whenever the audio/video is playing |
|
|
| normally. Inappropriate signal level setting may |
|
|
| cause overpowering issue that would shorten the |
|
|
| product life significantly! |
|
|
|
|
|
|
www.avenview.com | 8 |
|
|